- cross-posted to:
- [email protected]
- cross-posted to:
- [email protected]
Spoiler, its RDT
In case people do nto know what RDT is, which they really should if they have been into coffee for a little while as it makes a big difference:
RDT is Ross Droplet Technique, which is very much adding water to beans. Named after David Ross who came up with it back in 2005
I wouldn’t recommend that approach, its more suited to single dosing, which is based around grinding only the amount of beans you need for that single lot of coffee by only feeding the hopper with the amount of beans needed rather than using the hopper for bean storage.
So weighing out your beans first for a single espresso or pot of pour over, wetting those beans with a drop or two at most of water, giving them a shake/stir, then feeding them into the hopper and making sure everything comes out that you put in.
Single dosing makes it easier to get the exact amount of coffee by weight each time from cheaper grinders and can lower retention (how much ground coffee the grinder holds in its burr chamber and spout) when combined with RDT and flushing out the grinder with something like bellows and discarding what comes out as its mostly chaff and fines that you do not want. Coffee tends to build up even in expensive grinders without flushing it out, this goes stale over even a few hours and works its way into your normal cups of coffee.
Grinding by weight is still pretty limited availability, most with a hopper tend to offer grinding by time, which is nowhere near as accurate. Grinding by weight makes it easier to make your coffee more predictable, its especially important for espresso as you are trying to fill the basket almost but not quite the top. Espresso is better measured by volume as coffee density varies by roast type and by time since the beans were roasted, but that is much harder to do than by weight on a regular basis so most people just use weight.
That is a very detailed answer. Thank you.
Lol, always happy to help people who ask.
There are a lot of simple things, often free or low cost that people can do to get a lot more out of their existing gear, and the more people know that the better.
You’ve managed to convince me that I won’t do this. I am willing to trade slightly worse coffee for the convenience of simply pressing the button on my grinder.
And that’s a perfectly valid choice.
Beans and water quality >>>>> technique >>> grinder >>>>> espresso or pour over gear, for coffee quality anyway. You’ll get most of the way there just getting the first two right
Personally an extra minute a day isn’t going to kill me and I like tasty coffee. Modern home grinders are trending towards single dose anyway, so it becomes closer to the norm than hoppers that are better suited to commercial grinders due to the throughput of coffee beans they need.
I drink about 5 coffees a day, so the beans only stay in my hopper a little while. But yeah, my setup doesn’t make fantastic coffee but I know how to make it not terrible - and it’s a cost and convenience compromise I am happy with.
Whatever works for you.
I am too focused on getting the exact weight of grounds out to make my recipes exactly repeatable (and pretty much essential for espresso anyway), which is so much harder to do with the majority of affordable grinders, to even entertain using a hopper. Then the retention caused by not being able to use bellows and RDT shudders
I am only going through about a kilo of espresso and a touch less than that of pour over beans a month, so its not like I am high volume.