Today I was testing the RAM of a friend in my PC and since I had it opened up anyway, I thought I could renew my thermal paste as well. When removing the block from the CPU, I saw this:

Small hole with green and white corrosion
Big blob of white corrosion

To me, this looks like corrosion. The AiO is roughly 6 years old, so it’s nearing its end of life anyway, but is that normal? Should I still use this?

Thanks for any advice.

    • @theunknownmuncher
      link
      English
      912 days ago

      Can’t beat my NH-D15. Air coolers reign supreme, with proper case flow

  • @[email protected]
    link
    fedilink
    English
    1412 days ago

    Doesn’t look like corrosion, since that would likely be a blue/green color from the copper (you can see a little of that oxidation in the third pic), but it probably is a buildup of minerals as the main plate has slowly leaked fluid out the sides.

    Should you use it?

    It’s leaking fluid. Unless you know for a fact it’s using some kind of non-conductive fluid, it’s a matter of when it leaks onto something more important, not if—probably your GPU, if not your CPU.

    • @cybervseas
      link
      English
      412 days ago

      Wait, there are nonconductive PC cooling fluids? I need to learn more.

      • @[email protected]
        link
        fedilink
        English
        712 days ago

        There were some really toxic ones used in early supercomputer days.

        Mineral oil is nonconductive. Some people even do aquarium builds with the whole mobo and gpu immersed in mineral oil. I don’t think mineral oil is used in loop coolers though.

        • @cybervseas
          link
          English
          112 days ago

          Yeah I think outside of transformers trying to pump mineral oil without constantly dissolving your o rings would be a nightmare.

      • @[email protected]
        link
        fedilink
        English
        212 days ago

        I don’t know of any, but I don’t keep up with the world of liquid cooling. Water is usually the most common, since it is cheap and has reliable performance.

      • @[email protected]
        link
        fedilink
        English
        211 days ago

        Pure water, by itself, is non conductive IIRC. It only becomes conductive if there is stuff dissolved in it, like with tap water where there are small amounts of minerals in the water.

  • knightly the Sneptaur
    link
    fedilink
    English
    8
    edit-2
    12 days ago

    I’d guess it’s a tiny leak and something in the heat transfer fluid can corrode copper when exposed to air. Copper turns blue when corroded, and the white buildup is probably the dissolved solutes from the fluid being left behind as the water evaporates.

    Probably best to replace the AiO.