Hi everyone, I have been tempted to go the Dolby Atmos route for a while now and I decided on the receiver to use: Onky RZ-50, but now my problem is that I have to mount 2 sets of speakers to my ceiling. I have 3 pairs of Elac Unifi 2.0: two front, two sides and (at the moment) 2 backs. The backs will be shifted to be atmos back speakers. So I am going for a 5.1.4 setup.

Now I am thinking about shifting my fronts to be the atmos fronts and buy the new Elac Debut 3.0s as the new front speakers. However the Unifi 2.0s are quite big and heavy, so I am not sure if there is a reasonable way to mount them to the ceiling without worrying that they fall on your head. Because of that I am thinking about buying the Micca RB42s for the front atmos which are a lot smaller and lighter.

I found this mount by k&m which claims to hold up to 25kg but as it would screw in the back of the speaker I am worried about the wood of the Unifi 2.0s to just split, as the speaker is very long…

What are your thought?

  • @too_much_too_soonM
    link
    English
    1
    edit-2
    9 days ago

    Atmos is about overhead sound. That is literally overhead coming down at the listener. How you get can be done in a variety of ways with greater or lesser success. There is always compromise too. Dolby set-up guides suggest your average hometheatre goes for 4 overhead speakers more or less evenly spaced between ceiling and listener in a rectangular pattern and mounted in the ceiling. Of course if you can’t get into the ceiling, running speaker cable becomes a big issue too. Your upward facing speakers, Dolby atmos enabled toppers, are a separate speaker unit that sits on top of your front speakers (they may be built-in) and used to “bounce” the sound off the ceiling is another way of doing it. It has mixed reviews. I have it in my current set up and its “just okay”. They’re kinda a last resort for atmos but better than nothing.