@ch00f to PC Master RaceEnglish • 8 months agoBusted RAM socket, meet soldering ironimagemessage-square9arrow-up166arrow-down10file-text
arrow-up166arrow-down1imageBusted RAM socket, meet soldering iron@ch00f to PC Master RaceEnglish • 8 months agomessage-square9file-text
minus-square@ch00fOPlinkEnglish15•edit-28 months agoThe pin was crushed by the previous owner. I was able to remove enough plastic to expose the conductor. Then I used my 0.1mm soldering tip to solder a small jumper from the crushed pin directly to the stick of ram.
minus-square@evergreenlinkEnglish12•8 months agoI wonder how tf they managed to crush just one pin. Also, if I understand this correctly, the motherboard now uhh… features integrated ram?
minus-square@ch00fOPlinkEnglish6•8 months agoHaven’t done that yet, but it’s pin 236 on DDR3 240 pin ram which I believe is a power rail, so low risk of issues.
minus-squareAvid AmoebalinkfedilinkEnglish2•8 months agoOh yeah, you’re probably right if it’s just power.
The pin was crushed by the previous owner. I was able to remove enough plastic to expose the conductor. Then I used my 0.1mm soldering tip to solder a small jumper from the crushed pin directly to the stick of ram.
I wonder how tf they managed to crush just one pin. Also, if I understand this correctly, the motherboard now uhh… features integrated ram?
Hybrid Integrated™
Run 4 passes of Memtest86+ on it. 🥹
Haven’t done that yet, but it’s pin 236 on DDR3 240 pin ram which I believe is a power rail, so low risk of issues.
Oh yeah, you’re probably right if it’s just power.
Are you MacGyver?