Basically what the title says. Here’s the thing: address exhaustion is a solved problem. NAT already took care of this via RFC 1631. While initially presented as a temporary fix, anyone who thinks it’s going anywhere at this point is simply wrong. Something might replace IPv4 as the default at some point, but it’s not going to be IPv6.

And then there are the downsides of IPv6:

  • Not all legacy equipment likes IPv6. Yes, there’s a lot of it out there.
  • “Nobody” remembers an IPv6 address. I know my IPv4 address, and I’m sure many others do too. Do you know your IPv6 address, though?
  • Everything already supports IPv4
  • For IPv6 to fully replace IPv4, practically everything needs to move over. De facto standards don’t change very easily. There’s a reason why QWERTY keyboards, ASCII character tables, and E-mail are still around, despite alternatives technically being “better”.
  • Dealing with dual network stacks in the interim is annoying.

Sure, IPv6 is nice and all. But as an addition rather than as a replacement. I’ve disabled it by default for the past 10 years, as it tends to clutter up my ifconfig overview, and I’ve had no ill effects.

Source: Network engineer.

  • @[email protected]
    link
    fedilink
    English
    -15 months ago

    Thank you.

    I’ve said this repeatedly in many communities and it’s like I killed the golden goose - people lose their minds.

    I disable IP6 everywhere - my router NATs everything as it is, why have another protocol running if I don’t use it?

    We’ll see what the future brings.

    • @calamityjanitor
      link
      English
      15 months ago

      I used to do the same. But some clients nowadays have IPv6 only nodes that I need to connect to, so I’ve had to enable v6.

      With AWS now charging for v4 addresses, the need to at least running dual stack might pick up.

    • @[email protected]OP
      link
      fedilink
      English
      -65 months ago

      I’d be somewhat lenient when it comes to IPv6 if it used 64 bit addresses instead of 128bit. It would still not be needed thanks to NAT, CIDR and DHCP, but at least a 64bit address space is more manageable.

      • @[email protected]
        link
        fedilink
        English
        1
        edit-2
        5 months ago

        It’s great for backbone and public address space - and maybe in enterprise, but there it’s a costly transition that won’t happen immediately. Things will change as hardware ages out and is replaced.

        New infrastructure will be mostly IP6.

        And when people leave the office, their machines will connect to, and transit IP4 networks, so they’ll still need to address how everything works over IP4 (say VPN connections, any hardware/software that’s still IP4 dependent in the data centers, etc).