Ok so as a long time smoker can you tell me how often I should be using pipe cleaners on my pipes/stems? Should I really be doing it after every smoke? I bought a pack of Zen pipe cleaners but they have some sort of sharp plastic/nylon/metal spikes and it hurts my fingers to use. I’ve also ordered a fairly expensive(for me) Meerschaum that is coming in the mail tomorrow and I have no idea if my current pipe cleaners are going to fuck it up. I would ask this stuff on reddit but fuck them and for some reason dam near everyone on the pipe specific forums I’ve been too seem idk almost pretentious and gatekeeping about tobacco types.
First off, that is a nice looking pipe. I have a couple of meers and I love them. I’m sure you know this already, but one of the great qualities of meerschaums is that they’ll absorb the oils from the tobacco and smoke and develop a rich, unique patina over time…but keep in mind it takes a looong time for that to fully develop. Years, not weeks. New meerschaums come with a light coating of beeswax that will soften and soak into the meerschaum as you smoke it. It’s supposed to help draw in the tobacco oils and give a head start on the patina development, but it will also pick up the oil/dirt from your fingertips and any ash that topples over the top of the bowl while you’re smoking. It’s up to you how precious you want to get about handling your pipes, but I’d recommend being very careful about only handling the pipe by the stem for the first 10-12 times you smoke it, until the wax is fully absorbed, so you don’t leave any stray smudges or marks.
On the pipe cleaner front, there are two main types: regular soft bushy ones and bristled ones, which is what you’ve got. (On a personal note, I prefer BJ Long cleaners because, in my experience, they don’t shed as much fluff as other brands I’ve tried). You should also have a Czech tool or pipe nail for tamping down the tobacco and scooping out the ash afterwards.
When I’m done smoking a pipe, I tap and scoop out all the ash and dottle and then put it back in the rack to cool off. You never want to separate the stem from the pipe to clean it out when it’s still warm, it can cause it to warp or crack and you won’t get a good fit afterwards. When I’m ready to smoke the pipe the next time, I run a regular bushy pipe cleaner through the stem and around the inside of the bowl to flush out any remaining ash or remnants before loading it up again. After 5-6 times smoking it, I will take the bristle pipe cleaners dip it very lightly in some Everclear or other high proof, neutral grain alcohol, and run that through the stem and shank of the pipe. The alcohol will loosen any tar buildup and the bristles will give it a deeper scrub clean than a regular pipe cleaner. Alternate with a dry regular bushy pipe cleaner to soak up the excess alcohol until the bristle one comes out clean. You don’t want to let the alcohol get into the bowl of the pipe too much, because building up a slight layer of carbon char in the bowl (called ‘cake’) is an important part of breaking a pipe in so it smokes it’s best…this is more of a briar thing, but it’s true to an extent for meershaums, too. I use the bristle cleaners on my meers and it’s never done them any harm.
Tbh, I don’t really care how the pipe colors or if it ever colors at all. I actually really like them when they are pure white, so if the coloring comes in in weird patches from handling, it’s not an issue for me.
I’m happy to share the advice, it’s clearly a topic I have opinions about. Some people like to get real fiddly or dogmatic about some aspects (only smoking certain tobaccos in certain pipes, this blend has to be aged for at least x years before it’s any good, blah blah) but outside of a few hard rules (do not remove the stem while the pipe is still hot is a big one) there really is no right or wrong way of doing it and most things come down to personal preference. Like any hobby, the most important thing is how much enjoyment you get out of it, and you’ll figure out what works best for you as you go.
Ok so as a long time smoker can you tell me how often I should be using pipe cleaners on my pipes/stems? Should I really be doing it after every smoke? I bought a pack of Zen pipe cleaners but they have some sort of sharp plastic/nylon/metal spikes and it hurts my fingers to use. I’ve also ordered a fairly expensive(for me) Meerschaum that is coming in the mail tomorrow and I have no idea if my current pipe cleaners are going to fuck it up. I would ask this stuff on reddit but fuck them and for some reason dam near everyone on the pipe specific forums I’ve been too seem idk almost pretentious and gatekeeping about tobacco types.
First off, that is a nice looking pipe. I have a couple of meers and I love them. I’m sure you know this already, but one of the great qualities of meerschaums is that they’ll absorb the oils from the tobacco and smoke and develop a rich, unique patina over time…but keep in mind it takes a looong time for that to fully develop. Years, not weeks. New meerschaums come with a light coating of beeswax that will soften and soak into the meerschaum as you smoke it. It’s supposed to help draw in the tobacco oils and give a head start on the patina development, but it will also pick up the oil/dirt from your fingertips and any ash that topples over the top of the bowl while you’re smoking. It’s up to you how precious you want to get about handling your pipes, but I’d recommend being very careful about only handling the pipe by the stem for the first 10-12 times you smoke it, until the wax is fully absorbed, so you don’t leave any stray smudges or marks.
On the pipe cleaner front, there are two main types: regular soft bushy ones and bristled ones, which is what you’ve got. (On a personal note, I prefer BJ Long cleaners because, in my experience, they don’t shed as much fluff as other brands I’ve tried). You should also have a Czech tool or pipe nail for tamping down the tobacco and scooping out the ash afterwards.
When I’m done smoking a pipe, I tap and scoop out all the ash and dottle and then put it back in the rack to cool off. You never want to separate the stem from the pipe to clean it out when it’s still warm, it can cause it to warp or crack and you won’t get a good fit afterwards. When I’m ready to smoke the pipe the next time, I run a regular bushy pipe cleaner through the stem and around the inside of the bowl to flush out any remaining ash or remnants before loading it up again. After 5-6 times smoking it, I will take the bristle pipe cleaners dip it very lightly in some Everclear or other high proof, neutral grain alcohol, and run that through the stem and shank of the pipe. The alcohol will loosen any tar buildup and the bristles will give it a deeper scrub clean than a regular pipe cleaner. Alternate with a dry regular bushy pipe cleaner to soak up the excess alcohol until the bristle one comes out clean. You don’t want to let the alcohol get into the bowl of the pipe too much, because building up a slight layer of carbon char in the bowl (called ‘cake’) is an important part of breaking a pipe in so it smokes it’s best…this is more of a briar thing, but it’s true to an extent for meershaums, too. I use the bristle cleaners on my meers and it’s never done them any harm.
Tbh, I don’t really care how the pipe colors or if it ever colors at all. I actually really like them when they are pure white, so if the coloring comes in in weird patches from handling, it’s not an issue for me.
I appreciate the advice.
I’m happy to share the advice, it’s clearly a topic I have opinions about. Some people like to get real fiddly or dogmatic about some aspects (only smoking certain tobaccos in certain pipes, this blend has to be aged for at least x years before it’s any good, blah blah) but outside of a few hard rules (do not remove the stem while the pipe is still hot is a big one) there really is no right or wrong way of doing it and most things come down to personal preference. Like any hobby, the most important thing is how much enjoyment you get out of it, and you’ll figure out what works best for you as you go.