• @[email protected]
    link
    fedilink
    2
    edit-2
    7 months ago

    Just push the piston all the way in, and the rubber clicks when it comes out the other end of the cylinder. This way you can store it in a compact package.

      • @[email protected]
        link
        fedilink
        2
        edit-2
        7 months ago

        Interesting. I’m using the AP Go, so maybe the normal one doesn’t extend all the way through.

        Edit: just checked how my normal AP works. It’s basically the same as the AP Go, but I guess this is a fairly new model, so there may have been some changes.

        Are you using an older version?

          • @[email protected]
            link
            fedilink
            27 months ago

            It seems that the older models had a problem that was fixed. So, the tip needs to be tweakws a bit.

            If you have an older model, store the pieces separately in order to prevent the rubber from being under constant compression. If you have a newer model, push the piston all the way in until the end of the piston pops out the other end. Oh, and that is only possible if the cap isn’t screwed on. That piece needs to be stored separately anyway.

            • @apfelwoiSchoppen
              link
              3
              edit-2
              7 months ago

              Yes, the existing comments already allude to these problems/solutions.