((Note: this is post of mine from a different site that is about a year old, but thought I would share it here too in case it helps anyone))

Old technology is once again getting attention, and this time it’s air-conditioners made out of terracotta clay.

“She was inspired by the Palestinian Jara, a traditional clay water container that is hung from the ceiling to cool water and cool the air. Specifically, the water contained in the hollow internal structure moves outward through the porous clay walls. With the heat of the air, it evaporates and is transformed into water vapor. This reaction absorbs heat from the surrounding air, cooling the water, the material itself and consequently the air in the room.” Forbes India In regards to Yael Issacharov.

There are two unrelated people currently being mentioned for promoting their designs using this technology; Monish Siripurapu(from India), and Yael Issacharov(from Israel).

Monish Siripurapu’s design is based off a beehive and uses a small pump to create a beautiful water fountain that both cools the air and can be used for gardening.

Yael Issacharov’s design uses no electricity, and instead relies on the naturally porous nature of the clay.

For dry and hot climates, this old technology could provide cooler air at an affordable price. The clay is readily available almost entirely world-wide, making it accessible and inexpensive.

"The humid clay traps some heat the air and the surrounding air gets cooled down to around 6-10⁰ C due to the process of evaporative cooling.“ EcoIdeaz in regards to Monish Siripurapu

Videos with more info:

Based on this information, I am wondering if a terracotta pot and a fan would have the same effect for a small room. Here’s a drawing of mine to help explain what I mean:

  • BlairOP
    link
    fedilink
    English
    55 months ago

    Thanks for explaining that!

    If you do, please share!! I would love to see the process. I don’t know if it helps, but I did some digging and found this:

    (Image source)

    It uses a revolving chimney cowl(a no-power way to increase air-flow) attached to a terracotta clay base. Perhaps the spinner concept would work for the funnel part you were talking about?

    • @[email protected]
      link
      fedilink
      English
      75 months ago

      apparently those little spinners are really inefficient at doing anything other than spinning

      • BlairOP
        link
        fedilink
        English
        25 months ago

        Dang! Well, I guess I will have to leave the inventing to everyone else haha. 😆

        • @[email protected]
          link
          fedilink
          English
          35 months ago

          I have no idea how it would be in this scenario, but in their intended purpose of pulling vapors out of a bathroom or whatever it is people use them for, apparently some non-moving plastic wing thing is better

          • BlairOP
            link
            fedilink
            English
            15 months ago

            Here, so they are mostly sold for on top of chimney ducts(to help pull out fumes), or fresh air ducts(to help push air in). SO my theory was to have the spinner in the wind (perhaps out a window) to help push air through the terracotta.

            Good thing no one built it. It wouldn’t have worked, and neighbours would have thought they were insane 😆

    • Atelopus-zeteki
      link
      fedilink
      15 months ago

      Thing is, physics requires the warm air to move up (convection). Tho’ it did give me a chortle. ;-)

      If I did do it, I would for sure share. They have clay working tools, etc, at our local maker space. So it could happen.

      • BlairOP
        link
        fedilink
        English
        1
        edit-2
        5 months ago

        OH! I didn’t mean use it as a chimney cowl, I just meant use the rough idea of it (like putting it on it’s side, so the spinner is out the window, or something, so the wind spins it and pushes air in). Though as someone has already pointed out, the spinners apparently don’t help at all, so my idea would not help you either way. 😆

        • Atelopus-zeteki
          link
          fedilink
          25 months ago

          LoL, I appreciate the input anyway. It’s all about getting us thinking, and creating solutions.