I’m using a Fellow Stag and a metal V60 with a fabric filter. I do a 1:16 ratio (16g of coffee and 256g of water). Generally I’ll place the V60 on the Stag while it brings the water up to a boil in order to heat it up. Then I’ll saturate the fabric filter with the hot water. I’ll use 212F water, but after pouring the water over the grounds, my instant read thermometer will read 195F. It seems weird that despite doing everything in my power to preheat all the equipment, the water drops a lot in temperature as soon as it hits the grounds. Any tips to tackle this problem?
I wouldn’t worry too much about it. The drop in temperature is normal and probably pretty consistent, so you can adjust your recipe to it and not end up with varying results. Let taste guide you, not just numbers!