• @[email protected]
    link
    fedilink
    English
    82 years ago

    My laptop’s cpu normally idles at 40C but whenever I do something moderately complex it immediately shoots up to 60X and the cooling fan goes brrrr. I’ve tried replacing the thermal paste and even the heat pipe system but neither helped. :(

    • TheSaneWriter
      link
      fedilink
      English
      72 years ago

      40C is a decently warm idle temperature, is your cooling system powerful enough?

      • @[email protected]
        link
        fedilink
        English
        7
        edit-2
        2 years ago

        I don’t know but there’s not much I can do about cooling in a laptop. The laptop is 8 years old and I don’t use it enough for this issue to be that big of a deal.

    • @WillerOP
      link
      English
      32 years ago

      my PSU fan is clicking and im just llike “this is fine”

    • Dudewitbow
      link
      fedilink
      English
      32 years ago

      If its a modern intel laptop, its likely the PL2 clocks. The PL2 level is basically a time interval where the cpus run at a higher boost clock than sustained turbo, and ia defined to run at that for a short time period (e.g about 40 seconds) before clocking to the standard boost clocks (PL1). Its why laptops heat up fast and ramp very quickly. It makes processors seem faster than they are. (Similar to like running speed in a 40 yard/meter dash vs a marathon running speed)

      • @[email protected]
        link
        fedilink
        English
        22 years ago

        The laptop has a 4th gen cpu, I think an i3 so it’s probably not classified as modern lol.

        • Dudewitbow
          link
          fedilink
          English
          12 years ago

          I see. I also have an old laptop (4th gen i7). I personally use throttlestop to limit its turbo clock speeds just for sake of noise.

          • @[email protected]
            link
            fedilink
            English
            22 years ago

            I decided to try undervolting my laptop’s cpu and found the intel-undervolt tool. It seems that reducing cpu voltage by 25mV has solved the issue.