Just looking for some advice if the idea I have in mind is even feasible.
I have 2 light switches in my kitchen, one for some pendant lights, one for some overhead cannister lights.
I hate the placement of the switches, since the pendant lights which I prefer are far away from the actual doorways into the kitchen. Meanwhile the cannister lights are on the switches near the doors.
I’m looking to do some clever “hackery” to make it so the switches by the doors control the pendant lights, if possible, but I don’t want to have to rewire things in the walls/ceilings.
Is there a good solution to this? I was looking at some Shelly switches, but I’m not sure those solve for the problem I wanna solve. I’m willing to swap out switches or wire in things near the lights, but trying to keep things simple as possible.
If you’re in North America, you can source Leviton wall switches. They’re UL-listed. They have ZigBee and Z-wave versions. They have plain switch as well as dimmer versions. Once you have radio control over the light fixtures via the switches, you can add battery powered radio buttons that look like light switches wherever you like and make them toggle the Levitons. This assumes Home Assistant availability. If you don’t have Home Assistant and you just want to solve this, Lutron has an equivalent solution with their own smart dimmers along with their own remote buttons.