I always see laptops come with larger bricks that have separate mains cable which plugs into the brick. Even if the adapter has some low power rating.

Example for comparison:

On the right is a standard laptop adapter.
Same price, same connector, same protocol, same power rating, far different size.

Why is that so?

Actually, the GaN adapter on the left also advertises itself as being meant for laptops, but by default, almost all laptops will come with something like the one on the right.

Or is it simply cheaper to manufacture while being sold for the same price?

  • @half_built_pyramids
    link
    02 months ago

    far different size.

    Size first. Power electronics don’t have the same miniaturization benefits (or expectations) for laptops as they do for phones. Some factor here is that there’s just a different convention for these two different types of devices.

    larger bricks that have separate mains cable which plugs into the brick

    There’s a manufacturing benefit having one circuit where you can just change the mains cable for length or country adaptor types. High probably the wall warts have the same ability, but it isn’t as obvious if the plastic parts are press fit.

    Why is that so?

    Some laptops could run off of 65 w, but only the very basic types. An Alienware m18 R2 gaming laptop has a 280 w adaptor and it isn’t close to the same size or price as a phone adaptor.

    Same for phones. 65 w is pretty beefy for a phone charger. It will come down to the requirements of the device.

    Generally speaking, a charger can have more amps than the phone or laptop requires and that’s usually okay. The voltage is what you have to be careful about. 5v is kind of a common electronics safe voltage. Good chance all these “universals” chargers are 5v.

    Again, something like an Alienware m18 R2 is going to require more than 5v.

    Or is it simply cheaper to manufacture while being sold for the same price?

    Good chance of that. Much easier to price fix on big warehouse type online marketplaces.

    • @[email protected]
      link
      fedilink
      English
      1
      edit-2
      2 months ago

      Really well written. The USB power delivery specification allows devices to negotiate different voltages. That’s why if you have a device of multiple ports, and you plug in a new device to charge, all of the devices stopped charging for a moment will they negotiate again.

      I’ll add, a lot of the phone chargers cannot sustain their maximum power output all day. They’re going to soak in heat, the large bricks are also a function of heat dissipation anticipating 24/7 usage