Ah yes, sapin is indeed fir. I assumed since pin is pine, sapin must be sapine… but it’s never that simple. 😁 When I said bar, I meant a piece that’s usually 240cm long, with a square-ish section about 4*4cm. The french for it is tasseau -google says “cleat”, but an image search doesn’t exactly return what I’m trying to convey. Anyway…! yes, for a freestanding screen I would go for a more stable wood, but there’s only fir and red wood, and the latter is unaffordable… it’s okay though ! as a complete amateur, I accept the risks. I am also not equipped to cut a rabbet (!), looks like I need some special equipment. Thanks btw, I just learned a lot !
Lots of ways to cut a rabbet, they make router bits for it, you can do it with a table saw (Americans often use a dado blade but it can be done with a standard blade in two cuts) or you can accomplish it with nothing but a chisel.
I’d have to go the manual route I think, given my lack of proper equipment. I’ll consider rabbetting for my screen, I always feel kinda bad using screws 😁
You will hear voices out there who will tell you it’s wrong or improper or lowly to use metal fasteners rather than traditional joinery in furniture projects. Those voices are dumb and bad and wrong. Pocket screw joinery–done correctly–is strong enough for projects like this, inexpensive and easy to make, and accessible without a lot of tools. If it holds the project you want together what’s the problem?
Yea, well said. I have a tendency to never be satisfied with my work, but I try hard for it not to extend to my hobbies. I recently completed a dish cabinet, mostly using brackets (after a failed first try with glue and gudgeons!). Ultimately I am very happy with it, like you said, it does the job. Thanks for the wise words
Ah yes, sapin is indeed fir. I assumed since pin is pine, sapin must be sapine… but it’s never that simple. 😁 When I said bar, I meant a piece that’s usually 240cm long, with a square-ish section about 4*4cm. The french for it is tasseau -google says “cleat”, but an image search doesn’t exactly return what I’m trying to convey. Anyway…! yes, for a freestanding screen I would go for a more stable wood, but there’s only fir and red wood, and the latter is unaffordable… it’s okay though ! as a complete amateur, I accept the risks. I am also not equipped to cut a rabbet (!), looks like I need some special equipment. Thanks btw, I just learned a lot !
Lots of ways to cut a rabbet, they make router bits for it, you can do it with a table saw (Americans often use a dado blade but it can be done with a standard blade in two cuts) or you can accomplish it with nothing but a chisel.
I’d have to go the manual route I think, given my lack of proper equipment. I’ll consider rabbetting for my screen, I always feel kinda bad using screws 😁
You will hear voices out there who will tell you it’s wrong or improper or lowly to use metal fasteners rather than traditional joinery in furniture projects. Those voices are dumb and bad and wrong. Pocket screw joinery–done correctly–is strong enough for projects like this, inexpensive and easy to make, and accessible without a lot of tools. If it holds the project you want together what’s the problem?
Yea, well said. I have a tendency to never be satisfied with my work, but I try hard for it not to extend to my hobbies. I recently completed a dish cabinet, mostly using brackets (after a failed first try with glue and gudgeons!). Ultimately I am very happy with it, like you said, it does the job. Thanks for the wise words