Possibly linuxM to Shitty [email protected]English • 1 month agoWhat would cause the network activity lights to glow solid?message-square11fedilinkarrow-up115arrow-down11file-text
arrow-up114arrow-down1message-squareWhat would cause the network activity lights to glow solid?Possibly linuxM to Shitty [email protected]English • 1 month agomessage-square11fedilinkfile-text
minus-square@[email protected]linkfedilink4•1 month agoIt’s up to the hardware vendor to code the lights. You should see if you can find who makes the chip and get an idea of what they mean. If you get both lights with no cable connected at both ends, you have a hardware issue. Both lights could mean full speed, or half duplex, or a wiring error. No blink blinky means no activity usually What is the device? If it’s a computer, what os? What motherboard or specific model? Do other devices work on that same cable? What is the other end plugged in to?
minus-square@Alexstarfirelink8•1 month agoI see the problem. You’ve caused an infinite loop. Gotta cut one of the cables so the data can get out.
minus-square@Passerby6497linkEnglish2•1 month agoIt’s really bad design having cables like that. You need to shift them all over by one so you can have a port for intake and for outflow. Not a bad plan for storing packets for travel though.
minus-squarePossibly linuxOPMlinkfedilinkEnglish1•1 month agoI went ahead and mounted this in the rack. I cut every other loop and then wired the free ports into the core switch. I think made sure STP was off on all devices. (That’s how you avoid malware)
minus-square@[email protected]linkfedilink3•1 month agoOh. You probably shouldn’t have used a Netgear.
minus-squareslazer2aulinkEnglish3•1 month agoWhy are you taking pictures during a broadcast? Can’t you hear what they are saying? Must be stormy.
It’s up to the hardware vendor to code the lights. You should see if you can find who makes the chip and get an idea of what they mean.
If you get both lights with no cable connected at both ends, you have a hardware issue.
Both lights could mean full speed, or half duplex, or a wiring error.
No blink blinky means no activity usually
What is the device? If it’s a computer, what os? What motherboard or specific model?
Do other devices work on that same cable? What is the other end plugged in to?
I see the problem. You’ve caused an infinite loop. Gotta cut one of the cables so the data can get out.
It’s really bad design having cables like that. You need to shift them all over by one so you can have a port for intake and for outflow.
Not a bad plan for storing packets for travel though.
I went ahead and mounted this in the rack. I cut every other loop and then wired the free ports into the core switch.
I think made sure STP was off on all devices. (That’s how you avoid malware)
Lol
Is that a time machine!!!11!!!1???/1!
Oh. You probably shouldn’t have used a Netgear.
Why are you taking pictures during a broadcast? Can’t you hear what they are saying? Must be stormy.