Nice and fluffy but even the idle temps go up too much to my liking.
SKTC S02 case Asus X570-I 5800 X3D Cooler Master ML240L (swapped stock fans for A12x25s) 2x16 GB HyperX 3200 MHz Asus TUF 3070 Ti 2 Samsung 980 2TB SSDs SF600 Gold pslate customs cables Linkup PCIe4.0 riser cable
Minor changes - replaced the stock power button (horrible feel, don’t recommend) with a vandal switch
Well, luckily I could offset the PBO2 curve to -20 on all cores and get my GPU stable on 937 mV so, all in all, it’s not that bad, around 80s when gaming (haven’t checked that in a while).
Unless my cat hops on, that is - I get 60s in idle (vs usual 40s) for CPU. Fluffy bastard.
I gotta learn how to use PBO. Is it difficult?
Not really, I’d point you to the walkthrough I used but it is/was on that other site (:
edit: Found the og manual: https://github.com/PrimeO7/How-to-undervolt-AMD-RYZEN-5800X3D-Guide-with-PBO2-Tuner/blob/main/README.md
Thanks! I’ll take a look, I’ve been editing it from the bios directly.
Even if info is on the other site, what I’ve done is read it then re-write it here on the appropriate community and link to it. Gotta start populating somehow. :)