So, you dd’ed the Android image for Orange Pi 5 to an external drive and want to boot your OPi5 from that drive. As far as I remember, in order to do that for a Raspberry Pi, you need to ‘tell’ the system where to boot from. For OPi, I found some information on how achieve that for Debian/Ubuntu. For Android the steps should be somewhat similar.
I’ve tried setting it to boot from an nvme, microsd and external and the result was the same – the board just sits there with no boot. But, as I said previously, writing it to disk with their sketchy software worked as intended.
…I’m starting to think there is something wrong with the image file.
Only on Linux. The command was simply
sudo dd if=image.img of=/dev/sda bs=1M.This one.
So, you dd’ed the Android image for Orange Pi 5 to an external drive and want to boot your OPi5 from that drive. As far as I remember, in order to do that for a Raspberry Pi, you need to ‘tell’ the system where to boot from. For OPi, I found some information on how achieve that for Debian/Ubuntu. For Android the steps should be somewhat similar.
I’ve tried setting it to boot from an nvme, microsd and external and the result was the same – the board just sits there with no boot. But, as I said previously, writing it to disk with their sketchy software worked as intended.
…I’m starting to think there is something wrong with the image file.