First time homeowner here so please forgive the newbie question. I’m in Texas so our houses aren’t built for the cold. We’re going through freezing temps at night right now, with temps getting up well above freezing during the day. I woke up this morning to my kitchen faucet not having water (at all) when turning it to the hot setting. It’s the type of faucet that you just turn left (hot) and right (cold) and lift to open. The cold water side is fine. The two other faucets found in the two bathrooms have hot water without issues, but they have separate faucets for hot and cold. I’ve been religiously dripping all our faucets every night since last week. Is it possible something froze? And what I can do to start figuring out the problem and possibly fix myself?
Thanks in advance!
Edit: Here’s what it looks like under the sink. The upper left tube is what I believe is the hot water, the right for cold, and the bottom goes to the dishwasher.
Update: Water finally came out! I left the faucet open on hot, then ran hot water on all the sinks and showers in the bathrooms to get the water heater pumping. After around 10 minutes, water started to trickle and eventually went full blast. I’ll make sure to drip the hot water as well and not just cold from here on out! Thanks to everyone who responded!
It probably won’t be under the sink unless it’s really cold there, it’ll be further in towards where your hot water tank is.
As far as the waiting goes… maybe? the outside temp will warm up faster than where your plumbing usually is as it shouldn’t be getting much outside airflow to help it warm up, so it may not get much of a chance to warm without assistance. I’m going to assume you don’t have a basement but just a crawlspace under the floor where the pipes are… is there somewhere you can put a fan blowing underneath to help push some heat under there?
If the hot line running to your island runs close to another hot line, running hot water on your other taps may help warm things a bit down there too, but that’s really slow and not a very efficient method.
Fortunately it’s not too cold out down there so it shouldn’t take too much heat to get things flowing, it’s just a matter of finding where the plug is.
OMG water finally came out! I left the faucet open then ran hot water in the bathroom sinks and showers to get the water heater pumping. After around 10 mins, drops started coming out, then a trickle, then finally full blast. I’m just happy nothing seems to have been broken. Thanks for the responses! Oh and to answer your question, we don’t even have a crawlspace, the house just sits straight on top of the foundation.
Awesome! Glad it worked out for you!