tl;dw:
Modern cars are not as easy to siphon gas out of. You’re going to need a narrow, semi-rigid tube to get past any check valve. Make sure this tube is long enough to reach the bottom of the tank.
Of course, if you’re not concerned about the car, you can punch a hole in the bottom of the tank and capture the fuel that way, but you’ll certainly waste some fuel.
@horse_battery_staple makes an excellent point: If you are uncertain about the quality of the fuel you are siphoning - whether that be because of its age, contaminants (rust/water), or if it has two stroke oil in it, be aware that the vehicle you run the fuel in may run badly, and you may incur mechanical problems, either in the short or long term. Generally speaking, “she’ll run,” especially if you’re cutting the acquired fuel with known good fuel, but you should consider this as an “oh shit” option.
Oh right right - but I figure if you’re siphoning fuel out of something to use in a car, you have a short term and/or emergency need that you are probably willing to sacrifice some long term reliability for.
Agreed. Hopefully folk don’t have to use this advice more than once if at all. Thanks for putting up the post.
Edited the main post with an appropriate warning, thanks for making me think about it.
Happy trails friend.