They came with my kegs from Kegco but I think they’re limiting the beer’s CO2 intake. I’m going to swap them out for traditional ones today to see if they make a difference.

I have been plagued by poor carbonation and I have tried everything else.

  • @[email protected]
    link
    fedilink
    English
    31 year ago

    Hmm. I would personally try blasting some CO2 through the liquid post to clear out any blockages.

    • @smellhoundOP
      link
      English
      21 year ago

      For what it’s worth, here’s what the old post looked like.

      I put the new post on and the beer immediately went up the line out. I don’t think there was a clog at all. Going to leave it for a couple days to see if it makes the difference.

      • @[email protected]
        link
        fedilink
        English
        21 year ago

        I don’t notice anything super out of the ordinary. The poppet does appear to be more depressed than usual (they usually sit flush with the top of the post) but if anything I would think that it would be more likely to flow normally in this state (rather than not pour properly). I’m glad the new post seems to be working at least!

        • @smellhoundOP
          link
          English
          21 year ago

          Yeah, we’ll see if that does the trick. Thanks again!

    • @smellhoundOP
      link
      English
      21 year ago

      Yeah, not removing the dip tube entirely?

      Also, I would assume with a slow leak that I would find myself running out of CO2 pretty quickly, right?

      • @[email protected]
        link
        fedilink
        English
        21 year ago

        I mean you could remove the dip tube but then you are opening up the beer to oxygen and potential contamination. Blasting gas through the liquid post can help clear clogs without opening up the keg. You can check for leaks by spraying the posts and the lid with either starsan or just soapy water.

        • @smellhoundOP
          link
          English
          21 year ago

          Yeah, I was worried about contamination, too. I’ll give your method a try. Thanks for all the advice!