Anyone else have a similar experience with one of these drives?

  • @Intralexical
    link
    English
    161 year ago

    I’ve been telling people for years that the entire 21st century is at risk of being a lost century. Even personally I can’t guarantee my data will be with me 20 years from now even though I back it up. If you care about a photo or document, print it and throw it it a box. As I get older I find more of an obsession with physical media from a preservation point of view. Because I know my books and pictures will be around 50 years from now. Digital files not so much.

    LOCKSS and KISS, though. Flash chips don’t last forever but are pretty durable, and so are optical media as long as they’re the right material. SSDs decay and HDDs fail, but for magnetic platter media even if the head or motor crashes there’s always the old magnetic microscope in a pinch. USB’s not going anywhere, and if you have four or five copies that you don’t completely neglect and don’t store in the same physical place, presumably you’ll have the chance to notice and take corrective measures if any of them start failing or are at risk.

    I don’t actually know that an individual book or picture will still be around in 50 years; Fire, flooding, insects, acidic paper, low-quality ink maybe— Digital stuff’s fragile, but so is physical stuff. Stick it in the attic, and the heat’ll speed up any chemical reactions and probably make it cozier for insects; Stick it in the basement, and the condensation will get you mildew and rot. By contrast, having a flash drive accidentally survive a trip through a washer and dryer is a pretty common occurrence, and I’ve yet to lose a drive even with that level of negligence. Material compatibility’s one of the very most basic parts of a set of very precise manufacturing techniques, tin whiskers seem pretty rare these days, the really scarily insidious stuff like hydrogen embrittlement is super improbable, and most biological forms of decay haven’t adapted to eating cured epoxy and monocrystalline silicon yet.

    At least I sorta know how a flash cell or hard drive platter is meant to be structured; Who knows what weird organic reactions and unstable or slowly diffusing molecules are happening in the pile of chemical pigments on a sheet of likely-acidic bleached cellulose and cheap ink or toner, and whether it will still be legible to human eyes in however many years? Plus, a printed photo or document starts fading the very instant it’s created, and it gets a little worse every time you touch it with sweaty human hands or look at it while exhaling moist human breath and corrosive enzymatic saliva droplets under a white LED lamp or G-type star shooting out ionizing UV rays. Digital failures tend to be catastrophic, but at least up until the moment it fails, you can make sure that it is the exact same picture or text— And you can make many, many copies very cheaply, all of them very physically durable compared to paper, and know that they are all the exact same picture and text.

    That said, I absolutely agree with your overall assessment that most of the information in the early 21st century, including most of the public Internet/WWW, most likely either will be or already is… Maybe not technically lost, per se, given how much caching and saving happens on private clients, but certainly rendered inaccessible.

    Ideally I’d really love to see a return of microfiche, actually, using modern polymers and metallization. I’ve been meaning to look into that for a while now. At a reasonable scale for optical viewing, you could fit… much, much more content than you might expect, and do it several times over, in an entirely reasonable number of pages. Your comment actually spurred me to finally think of a practical way of printing that— for years before, I’d been trying to idly figure out a process based on photomasks and nanoparticles suspended in resin, which had always felt like a very messy and tricky idea, but I just thought of another idea– So thanks for providing some inspiration there.