Welcome to today’s daily kōrero!

Anyone can make the thread, first in first served. If you are here on a day and there’s no daily thread, feel free to create it!

Anyway, it’s just a chance to talk about your day, what you have planned, what you have done, etc.

So, how’s it going?

  • @[email protected]OPM
    1•1 year ago

    Thanks! Updating to the official HA image and docker-compose seems to have worked (like you mentioned, it was probably the “priviledged: true” missing that was causing the issue.

    I’ve just worked out how to add the sensor, and it seems to be working! Although the button is not working very well. I popped the cover off and it seems the button is not attached properly to the circuit board, I managed to use a screwdriver to get it into pairing mode but I’m gonna try to get a replacement one.

      • @[email protected]OPM
        1•1 year ago

        Bought one of those as well! You previously mentioned them so I got one.

        With the humidity sensor, it reports the last update was almost an hour ago. Does that mean it’s no longer connected? I can’t seem to see any indicator in HA as to whether something is currently connected or not.

        • @[email protected]
          2•1 year ago

          In HA if you go to the device, there’s an option Zigbee info which shows latest seen.

          If humidity doesn’t change it won’t update it, to save battery, at least that’s how I understand it.

          At the start I’ve struggled a lot with devices that became unresponsive. Adding a bunch of mains powered devices solved that.

          • @[email protected]OPM
            1•1 year ago

            Thanks, I’ll keep an eye on it. It’s literally sitting right next to the Skyconnect dongle so shouldn’t be a range problem. I’m pretty sure the temperature would have changed so I’ll try re-pairing and see if that helps.

            If it goes out of range then back in, does it automatically reconnect? And do you know if the button on the humidity sensor does anything other than holding it in for 5 seconds puts it in pairing mode? Wondering if you press it briefly does it turn it off or reset the connection or anything.

            • @[email protected]
              2•1 year ago

              So… Zigbee should be self correcting / fixing. But I’ve had sensors become unresponsive and had to re Add them to ZHA. Don’t have to delete them first.

              The button wakes up the sensor if pressed briefly, something you should do when you click reconfigure. I’ve never had luck with reconfigure though.

              • @[email protected]OPM
                2•1 year ago

                Thanks, that’s helpful! I’ve readded and it seems to be working now. Humidity went from 48% at 20C to 65% at 20C in an hour or two, presumably from cooking dinner.