Based on another thread, I was asked to repost an interesting croudsource of information on the coffee we buy:

Make your replies fit the following format;

  • Location: at least your country, not the beans.
  • Retailer: Were did you buy your beans?online, brick and mortar. Be specific.
  • Beans: If a blend, name the brand and type. If single origin, give the detes, i.e. country of origin, region, farm, processing method, elevation
  • Roast: Light, medium, dark, french …
  • Advertized tasting notes: e.g. stone fruit, sweet, balanced acidity.
  • Your tasting notes: Do you agree with the advertized cupping notes? Why?
  • Price per unit: e.g. $/lb or £/kg etc…

With any luck we might discover hidden gems, or discover a new favourite or maybe a bargain.

  • tomkatt
    link
    fedilink
    English
    arrow-up
    2
    ·
    8 days ago

    Might be a fun thing to do, just not sure how I’d set up a camera though. I’ll think about it. If you’re interested in the process, I learned about it from this video: https://www.youtube.com/watch?v=EniBymmi-cw, plus some trial and error on my part.

    I started with a cheap aluminum Whirly Pop I had on hand, and when I realized I was going to keep doing it, I splurged for this much better stainless steel model. Aside from the popper, you’ll need the following:

    • laser thermometer for temperature monitoring
    • food scale
    • metal mesh strainer or colander x2 for tossing the finished beans to remove chaff
    • a method to cool the beans (this is personal, plenty of ways and I’ll explain what I do below)

    My process:

    1. Measure out beans to preference (I’ve found around 330 grams to be ideal after testing different batch sizes)
    2. Preheat popper on high heat to around 370f
    3. Once at 370f, turn heat down to around 5 and a half (if your stove has an off - 10 dial)
    4. Toss beans in, close lid, start stirring a bit faster than one rotation per second (maybe 70-80 rotations per minute)
    5. Every two minutes, lift off heat, shake vigorously to toss the beans around to prevent scorching of beans and redistribute them
    6. Monitor temps, and around 340f, turn heat down slightly, just under 5 or so
    7. Continue stirring until first crack.
    8. Let the crack continue and once the beans are going nuts crackling, count to about a minute or a minute and a half at most, then dump them into the colander or mesh strainer.

    Once done, I take the beans outside and pour them back and forth between the strainers/colanders to toss the chaff off. From there, you just need to cool the beans to under 100f, and there’s lots of methods. I just use two baking sheets to drain the heat. Dump the beans on a sheet, let it absorb the heat, dump the beans onto a second sheet. Rinse the first sheet in cold water, wipe dry, transfer the beans again. 3-4 transfers is usually enough to cool them down.

    This all sounds like a lot of steps, but the whole process is maybe around 20 or 25 minutes, give or take a bit. Method and temps will probably be a bit different for you, as my beans crack at lower temps (around 390f or so) because I’m at high altitude, water boils at around 204f here instead of 212f.

    One disclaimer, if you want anything darker than light roast, I highly recommend doing it outside if possible, or have really good ventilation. Through first crack your fine and it’s mostly water vapor evaporating, but past first crack it can get really smokey. Thankfully, my preference is light roast, dark roast coffee has always given me heartburn. 😅

    Here’s an example of one of my batches: