A few real life examples, all of which I’m in the middle of:
- Fixing this closing mechanism for this box in the kitchen. A bit of trial and error to 3d print a replacement for this part that broke off.
- Learning Rust. I got fluent in Perl in the previous century, and never quite got to that level with anything else. I figured it’s time to pick up something more modern.
- Sorting out my homelab/selfhost setup. The hardware is in place, but the software side isn’t quite there yet.
- The greywater vent goes up to the attic. I have started planning adding a vent and some more piping to place the endpoint outside, but it’s probably not gonna be done until spring as it’s cold as fuck these days.
- Autopilot module for an RC aircraft, complete with altitude and attitude adjustments. Next up on the too list is navigating through waypoints. If budget allows I will build a plane around it next year.
- Homebrewing a weather station door bell camera combination. Early planning stage.


Christmas lights.
…Which is more complicated than it sounds, because I can’t just go buy random single-color or proprietary app-controlled strands from the store like a normal person. I have to insist on getting bare strands from Aliexpress and building my own WLED controllers. (Some of the lights are even soldered together using PCBs I designed myself and had manufactured by JLCPCB.)
(I’ve also got various selfhosting and Home Assistant things going on, but those are more of a continuous process than distinct projects.)