the grammar being wrong also bothers me

  • dual_sport_dork 🐧🗡️M
    link
    fedilink
    arrow-up
    6
    arrow-down
    4
    ·
    3 hours ago

    No, I’m stating the incontrovertible fact that a digital and completely DC powered device does not have the frequency of its internal components “conditioned” by its connected power source, lol.

    Among quite a few other things.

    • dustyData
      link
      fedilink
      English
      arrow-up
      3
      arrow-down
      2
      ·
      edit-2
      2 hours ago

      Just checked this camera manual (2015 Sony Alpha 7RII). It does H.264 (it calls it AVC, and it also uses specifically AVCHD, exclusive to Sony. So, old version) encoding of video. That encoding does have PAL and NTSC hard requirements when recording 24fps, 1080 24fps is only possible in progressive mode, which means it is tied to analog standards. The rolling shutter has to match the target frame rate. Encoding is done on the memory card, it is called real time compression. It is a format intended to create DVD and Blu-Ray directly compatible files. Which were still, back then, held back by PAL and NTSC standards as they were targeting a TV market that were still technically very analog limited¹.

      The camera also has TV out (early microHDMI it seems), which is also limited by PAL/NTSC compatibility of the TV.

      Like, this camera won’t do 24fps video in PAL mode, for example. It also won’t do MP4 for more than 20 minutes because it has a file size limit of 4GB. That is the age of technology we are dealing with. Things are not magical just because they are digital. There are hard technical limits and there’s a history behind the development of technology we have today. This camera cannot record certain fps settings when an HDMI monitor is connected at the same time, that tells me there’s hard wired video processing that lock steps a ton of what the camera can and cannot do.

      ¹: quick note, TVs are actually still limited by NTSC/PAL standards. Manufacturers have just implemented several tricks to circumvent technical limitations. Such as TVs nowadays can detect which type of grid they are connected to and pick and choose workarounds depending on what the user is trying to play (and also which analog signal tuner to use, if they still support that). This usually creates certain artifacts, like when a 50hz TV is trying to play a 24fps or 60fps digital video, for example. For the vast majority of content you wouldn’t notice unless you were looking for it. But on some movies it is extremely obvious, since it changes the pace of movement by dropping or repeating frames in a way that was not intended by the file format.

      • jumping redditor [they/them]@sh.itjust.worksOP
        link
        fedilink
        arrow-up
        1
        ·
        52 minutes ago

        The camera can record 1080p60, 1080p50, 1080p24, 1080p30, 1080p25, 1080i50, and 1080i60 as well as some 720p and 4k resolutions it takes regular SD cards that do no processing and is able to run android apps (playmemories). don’t think you know what you’re talking about.

        • dustyData
          link
          fedilink
          English
          arrow-up
          1
          ·
          18 minutes ago

          Can you confirm that it is a 2015 Sony Alpha 7RII?

          Just to make sure I’m checking the correct manual. If it is, it can indeed do all of those stuff, but the manual state some very specific limitations when recording 24fps and it also warns the user directly that changing between NTSC/PAL requires a reformat of the SD card and that some video options will not be available depending on the mode the camera is in. (I linked at some captures here.)

          Also, the red flag is that those old HD versions come in progressive and interlaced flavors. That is the giveaway of the time that the camera is from. You did realize there’s no 24 fps interlaced? it is because of all the things I said above. It only does 24fps in progressive, which locks the camera to NTSC mode for both file formatting and capture. You’ll notice that cameras made after 2020 (or thereabouts) no longer use the little i or p after vertical resolutions. Because they switched to H.265 or HEVC, which doesn’t provide progressive or interlaced frames for video compression (technically it is all progressive now, but since there’s no longer a need for interlaced, it is just not mentioned). Today it is more common that they are referred simply as 1080 or just FHD. While 720 is now just HD and 4k stayed just 4k since there was never a need for interlacing 4k.

      • dorkage@lemmy.ca
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        3
        ·
        1 hour ago

        You are just making completely wild guesses here.

        1. Encoding is not done on the memory card. It’s done on either the system on a chip of the camera or a dedicated encoding engine in the camera.
        2. The 20 minute limit isn’t a size limit it’s a time limit that prevented it being classified as a Video Camera.
        3. TVs now don’t get sync from the mains. They all use universal power supplies that don’t care about which frequency or voltage they are connected to.

        Seriously you sound like a LLM stuck in a hallucination.

        • dustyData
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          1
          ·
          51 minutes ago

          I know it is fashionable to be mad at people online, and call bullshit and throw insults like little children on a playground, but several things:

          This is a video limitation, not shutter speed for still pictures. When you go from a physical shutter to a rolling shutter, the transistors on the CMOS sensor have to be coupled to a specific clock, at which rate they can flush voltage to the video processor. That clock conditions everything, and this specific camera obviously has some clock lock step somewhere in the video processing chain that affect writes to disk because it’s specifications state very clearly a ton of limitations that cannot be explained away by legal bickering. (Not even to mention the other complexities like ISO amplification and a myriad of other factors also altering the rolling shutter refresh rate.)

          So, from the manual:

          My suspicion is that it has to do with using an ancient HDMI (and ancient codecs, because WTF is limiting MP4 to 4GB) and also the ties, at the time, of Blu-ray digital file formats compatibility with TVs. Back then, H.264 was still very NTSC/PAL oriented. That was the tail end of interlaced and progressive frame compression.

          I’m completely confident that you are all super duper more intelligenter than Sony engineers. But again, just because it is digital, and just because it is Sony, and just because it was an expensive flagship, doesn’t mean it is magical. There’s a history and a cost in engineering R&D time for making these digital features we take for granted today, that did not exist 11 years ago.

          As for: “TVs now don’t get sync from the mains.” That is true, but did you know that LEDs still refresh their voltage state at a regular interval that is fixed at manufacturing time? Which interval to use will depend on which market the TV is intended for. And, for convenience sake, factories still use NTSC or PAL as standard. This is why TVs are either 50hz or 60hz or 100hz or 120hz, even if they are LED or based on other solid state components. Your attitude is like somehow engineers nullified basic physics, no, they didn’t. They found workarounds so end users don’t have to think about it as much. But the technical constraints are still there. A 50hz TV will show an entirely different viewing experience of a 24fps movie, than a 60hz TV. Even if both are technically using the exact same LED technology, and both are internally DC electricity that is technically independent of the mains frequency.

          • dorkage@lemmy.ca
            link
            fedilink
            English
            arrow-up
            1
            arrow-down
            1
            ·
            24 minutes ago

            I’m not mad at you, I’m just stating you are rambling on about things that makes no sense. Hense the LLM comment I made. I genuinely feel like I’m interacting with an LLM here.

            I’m also not saying I’m smarter than the software engineers that worked on this product. You seem to assume that I think I am.

            You also assume I have an attitude that physics don’t matter.

            You keep talking about mains frequency and TVs which is not related to the topic of formatting a SD card to change from NTSC to PAL. The camera makes its own clock internally arbitrarily FACT. Otherwise, you’d be locked into a single multiple of 1/50 or 1/60 a second as I mentioned in another comment.

            You keep adding side notes “did you know…?” that 1, don’t make any sense, and 2 aren’t even remotely about this original topic.

            You are the one who gives me the impression “I don’t read the other posters comments” and can’t stop and think “hey, maybe I’m wrong here”, but rather you think you need to belittle me and say “I’m completely confident that you are all super duper more intelligenter than Sony engineers.”

            • dustyData
              link
              fedilink
              English
              arrow-up
              1
              ·
              8 minutes ago

              I’m giving my impressions as I understand them. You are free to disagree, but come at me with technical reasons. Attack the argument, not the person. All I’ve read is “you don’t know what you are talking about, this is bullshit, you are an LLM”.

              None of that disproves my points. Sorry if faced with nothing but ad-hominens I don’t take your comments seriously. You’d understand my frustration.

              The camera makes its own clock internally arbitrarily FACT.

              FALSE, the camera has a set clock, whichever the image processor runs at. It can’t make up new clocks arbitrarily. It has to use technical workarounds to provide a wider range of options for the user, and this creates technical limitations. The physical shutter CAN run at arbitrary shutter speeds, BECAUSE it is mechanical. The rolling shutter CANNOT run at arbitrary shutter speeds, because it is locked to the processor, and whatever the sensor can or cannot do.

              The camera doesn’t set the file format arbitrarily because back then the encoding format couldn’t do it, FACT.

              If you can’t seem to link why I’m talking about this things with OPs question and don’t seem to be able to come with a logical counter argument, have you considered that, hey, maybe you are wrong here?

    • CTDummy@piefed.social
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      1
      ·
      edit-2
      3 hours ago

      He didn’t claim that? If you’re changing between PAL and NTSC formats on a digital camera it requires a reboot and formatting the memory card because they’re different formats. NTSC is 60hz base and PAL is 50hz. The difference in these frequencies need a reboot to initialise pixel and timing clocks as well as the viewfinder to match the selected format.

      Edit: also it’s internal components aren’t “conditioned” by a connected power source. What’s being stated is the other way around. These standards were originally made with the power source’s frequency in mind.

      Wiki

      NTSC is used with a frame rate of 60i or 30p whereas PAL generally uses 50i or 25p; both use a high enough frame rate to give the illusion of fluid motion. This is due to the fact that NTSC is generally used in countries with a utility frequency of 60 Hz and PAL in countries with 50 Hz, although there are many exceptions.

      • Lee@retrolemmy.com
        link
        fedilink
        arrow-up
        2
        ·
        2 hours ago

        The timing of the video capture is almost certainly configurable via software and can be done without rebooting as well as a number of other things related to the video format change, but I suspect the reboot is due to simplifying the software. There’s probably a lot of things done at boot time based on the video format that’s just easier to reboot than to write code that can change those values on the fly. Sure rebooting is an inconvenience to the user and it’d be better to allow it to be changed without rebooting, but probably most users don’t change video format often and requiring the reboot means they can make the software simpler (and more efficient).

        I think the bigger question is: why does changing NTSC/PAL require formatting the memory card? The frame rate of the video is independent of how the data is written to storage (aside from analog media). Even if there was a separate NTSC/PAL clock for the video capture side, the storage device doesn’t need to use the same clock and even if you did change the clock of the storage, that wouldn’t change the actual data being written, thus no need to reformat.

        The clock signal for storage writes is independent of the data being written and in fact, for all solid state media I can think of, the clock doesn’t even need to be consistent. The clock speed is effectively variable as long as other timing constraints are met (think things like max speed, but when you get in to electronics hardware, we have to get in more detail like how fast does a signal transition and how long from one signal transitioning until another is valid), but again that’s independent of the video format. It’d be like saying you can’t put a PAL and NTSC .mkv file on the same memory card or that you can’t read a memory card in a different device because they were read/written at different speeds. This absolutely can be the case with analog storage, but not solid state digital. At least none that I’m aware of.

        • CTDummy@piefed.social
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          57 minutes ago

          I think what’s happened here is a misunderstanding that maybe weren’t helped by minor grammar missteps. Nor the reply coming in guns blazing claiming the original comment entirely bullshit.

          Like it was mentioned modern camera can change shutter speeds and exposure to account for most of what the original comment mentioned. In another comment.

          This is not even *remotely* what a high end modern camera does. Sony is obviously mum about the exact specifications of the “Bionz X” main image processor in the ɑ7RII, but it is obviously a modern highly specialized chip running most likely running at many hundreds of megahertz, completely independent of the camera’s external video output.

          If this were the case, that is the selected format having no bearing on sensor and internal clock rates (not the CPU clock); why can you find forum post with this model (or series, the MK3) where they have issues with lights flickering in captured video due to incorrect standard being selected? Which is then only fixed by selecting the relevant standard for the country? Granted I doubt they tried altering other settings.

          I think the bigger question is: why does changing NTSC/PAL require formatting the memory card?

          Yeah this I find weird as well. I agree this is likely just a simple setting that account for a multitude of things (captured video hz/fps mismatch, video output, etc). I think the problem if you set a camera you bought in a PAL region to NTSC, it’ll constantly spam you with prompts to switch on start up (which feels like a bug); leading to OPs warning. You’re not meant to flip flop between them.

          I’m not sure why it clears the file system either but I assume this is meant to be done once. Maybe Sony assumed you wouldn’t want to keep footage shot with the wrong standard (or it was sold to another person in a different region). I don’t think changing the clock rate for sensors implies also a clock change for writing to memory. Fuck knows for that aspect of it tbh.

          Edit: fixed as I thought it was a different person replying.