I was originally going to make a pithy comment here about how televisions never derived their sync frequency from the mains because I know full well that the sync pulse for analog television is sent along with the video signal from the transmitter and the TV is slaved to it. In the absence of this TVs from my era had their own oscillators that generated the appropriate sync frequency which may or may not have been in phase with the frequency of whatever it was they were trying to receive, and thus also a sync splitter circuit that attempted to switch the start of frame to be in lockstep with either the sync pulse from the station if it was strong enough and the internal timing when it wasn’t. The whole point of this was to be able to display at least some manner of intelligible image to the user as an aid to getting the station tuned in.
But then I remembered a key phrase there, which was televisions from my era.
(This is all just whiffling and is completely irrelevant to photography, so everyone who isn’t specifically interested in this rather off-topic diatribe is encouraged to ignore it.)
I had apparently blocked out the memory that prewar television sets in fact did derive their frequency from the mains. As it happened this turned out to be exactly as stupid of an idea as you think it was. Foremost isn’t actually the obvious consideration that the mains frequency isn’t all that accurate to begin with, but rather it’s the fact that it is spectacularly unlikely to be in phase with the frequency of whatever transmitting tower your TV is listening to. One which would of course be any arbitrary distance away, and not even guaranteed to be on the same grid. These interactions resulted in the appearance of “hum bar” artifacts on your screen where the refresh cycles didn’t quite line up. Sometimes these could be tidied away into an inconspicuous or even off-screen area with careful tuning (compensating for this sort of thing is part of what the old vertical and, ye gods forbid if we’re going back that far, horizontal hold knobs on old television sets were for), but if you were particularly unlucky due to wandering frequency timings they’d be rolling up and down your screen constantly.
Obviously the entire industry was keen to do away with this nightmare as soon as it was technologically feasible, and when transistors came about they sure did.
Once NTSC color came along they didn’t have a choice anyway, because the cycle frequency of color television isn’t 60hz like the mains anymore. In order to leave room — or rather time — for the colorburst signal, the frequency of not-actually-modern-anymore NTSC television is actually 59.94hz. So if you’ve ever wondered where that weird frame rate still available in all your video editing software comes from, now you know.
I was originally going to make a pithy comment here about how televisions never derived their sync frequency from the mains because I know full well that the sync pulse for analog television is sent along with the video signal from the transmitter and the TV is slaved to it. In the absence of this TVs from my era had their own oscillators that generated the appropriate sync frequency which may or may not have been in phase with the frequency of whatever it was they were trying to receive, and thus also a sync splitter circuit that attempted to switch the start of frame to be in lockstep with either the sync pulse from the station if it was strong enough and the internal timing when it wasn’t. The whole point of this was to be able to display at least some manner of intelligible image to the user as an aid to getting the station tuned in.
But then I remembered a key phrase there, which was televisions from my era.
(This is all just whiffling and is completely irrelevant to photography, so everyone who isn’t specifically interested in this rather off-topic diatribe is encouraged to ignore it.)
I had apparently blocked out the memory that prewar television sets in fact did derive their frequency from the mains. As it happened this turned out to be exactly as stupid of an idea as you think it was. Foremost isn’t actually the obvious consideration that the mains frequency isn’t all that accurate to begin with, but rather it’s the fact that it is spectacularly unlikely to be in phase with the frequency of whatever transmitting tower your TV is listening to. One which would of course be any arbitrary distance away, and not even guaranteed to be on the same grid. These interactions resulted in the appearance of “hum bar” artifacts on your screen where the refresh cycles didn’t quite line up. Sometimes these could be tidied away into an inconspicuous or even off-screen area with careful tuning (compensating for this sort of thing is part of what the old vertical and, ye gods forbid if we’re going back that far, horizontal hold knobs on old television sets were for), but if you were particularly unlucky due to wandering frequency timings they’d be rolling up and down your screen constantly.
Obviously the entire industry was keen to do away with this nightmare as soon as it was technologically feasible, and when transistors came about they sure did.
Once NTSC color came along they didn’t have a choice anyway, because the cycle frequency of color television isn’t 60hz like the mains anymore. In order to leave room — or rather time — for the colorburst signal, the frequency of not-actually-modern-anymore NTSC television is actually 59.94hz. So if you’ve ever wondered where that weird frame rate still available in all your video editing software comes from, now you know.