I cut out the bended upward part, then filed down the corners and gave it a slight bent. It originally was black ano so I wet sanded it with 1000 grit, give it a quick polish and then heat anodized. I used gas stove so finish isn’t as uniform as I would like, but it’s good enough. Here is a link to the clip I used: https://wurkkos.com/products/pocket-clip-for-ts10-fc12-hd15-hd20-ts25?VariantsId=10675
Nice! What clip did that start out as?
The new two way black clip from Wurkkos.
And you straightened the bend? Or the TS25 one and you cut it? Either way the colouring looks fine!
I cut out the bended upward part, then filed down the corners and gave it a slight bent. It originally was black ano so I wet sanded it with 1000 grit, give it a quick polish and then heat anodized. I used gas stove so finish isn’t as uniform as I would like, but it’s good enough. Here is a link to the clip I used: https://wurkkos.com/products/pocket-clip-for-ts10-fc12-hd15-hd20-ts25?VariantsId=10675
Wow thanks for the write up. It’s turned out fantastic and I’d love to recreate it