Big difference: Pop, at least, does not push Canonical’s proprietary “Snap” nonsense. You can use it if you really want, but it’s not installed by default. No snapd on my system, thanks.
Sure, but if I were recommending a Linux OS to a first-time user, I wouldn’t recommend today’s Ubuntu as it is likely to lock them into a proprietary single-vendor system, which is contrary to one of the main points of promoting free software.
The first-time user might not immediately notice the difference, but it’s (unfortunately) bad for free software to have more new users starting on today’s Ubuntu.
This is pretty sad because Ubuntu used to be the obvious choice to recommend to new users.
Either way, If I want to have a windows install, it’s either
in a vm
on a different physical disk that is kept physically unplugged from the motherboard until it is needed and then I’ll plug it in while unseating the Linux drives and any other drives windows does not need access to
I hate it, basically I have to force myself when I boot into windows to physically disconnect the RJ45 from the back, so it doesn’t replace the boot entries thru an update.
For the end user, especially a beginner, there’s 0 difference between them.
Shouldn’t be the other way around? Beginners usually won’t want to install DE’s or other stuff by hand:
Linux Mint offers a Windows-like experience with cinnamon out of the box, and has several stuff setup by default like system snapshots and media codecs.
Pop!_OS is really appealing visually and very comfortable to use and setup.
deleted by creator
Dual-booting is fine if you have more than one drive.
This, even still, with only one drive, I’ve done it before as a novice, if you rtfm you’ll be fine. Otherwise yeah, just put it on a second drive
I ran dual boot for years with zero issues. Just partition the drive or use two different ones.
If you have to dual boot, give Windows a separate disk.
Big difference: Pop, at least, does not push Canonical’s proprietary “Snap” nonsense. You can use it if you really want, but it’s not installed by default. No
snapdon my system, thanks.Mint is also strongly against Snap. The plurality of Mint’s users guide is “Why Snaps are disabled by default.”
Fair point, but that probably wouldn’t be a “big difference” for a first time user.
Sure, but if I were recommending a Linux OS to a first-time user, I wouldn’t recommend today’s Ubuntu as it is likely to lock them into a proprietary single-vendor system, which is contrary to one of the main points of promoting free software.
The first-time user might not immediately notice the difference, but it’s (unfortunately) bad for free software to have more new users starting on today’s Ubuntu.
This is pretty sad because Ubuntu used to be the obvious choice to recommend to new users.
Dual booting is fine if you are using 2 Linux OSes.
If one partition has windows installed an update can hijack the Linux partition or remove the grub.
Old news. I updated Winblows and nothing happened to systemd-boot.
It will depend on the update.
Either way, If I want to have a windows install, it’s either
I hate it, basically I have to force myself when I boot into windows to physically disconnect the RJ45 from the back, so it doesn’t replace the boot entries thru an update.
Shouldn’t be the other way around? Beginners usually won’t want to install DE’s or other stuff by hand:
Linux Mint offers a Windows-like experience with cinnamon out of the box, and has several stuff setup by default like system snapshots and media codecs.
Pop!_OS is really appealing visually and very comfortable to use and setup.
Ubuntu, well, is Ubuntu. I’m not diving into it.