Hi all,

I’ve been typing on the first keyboard I ever bought for about 7 years now (Sharkoon Skiller Pro +) and, after trying out some of the shiny mechanical keyboards my friends bought over the years (Roccat Vulkan Pro, Steelseries Apex Pro, etc), decided I wanted a new keyboard as well.

I’ve done a little research on keyboards as a whole and have a few favorites, but recently I came across ergonomic keyboards, such as shown in this community. Now, I’m unsure wether I want to go with a traditional board (my top candidate is the Meletix Zoom98 with Morandi Switches) or try something completely different.

I’m looking for stories and advice right now, to get the most out of the money i’m willing to spend on a keyboard (buying multiple is not an option at the price point of for example the Zoom98).

Looking forward to this :)

  • @[email protected]OP
    2•1 year ago

    I must say It’s daunting to reduce the amount of keys that much, since I’m used to full-size. Then again, I use the numpad mostly to control foobar2000 (music), which should be easily balanced with a thumb-activated additional layer in a board such as the corne. I can’t seem to find the fully assembled version of the corne, but the unicorne is assemblable without soldering. Would you recommend low-profile switches? I have absolutely no experience typing on those so I’d be interested to know what the difference feels like.

    • @[email protected]
      5•1 year ago
      • additional considerations
        • low profile switches versus regular switches
          • people like the ergonomics better for low profile but (as @pixls mentioned) selection for switches and (especially) keycaps is still very limited
        • keywells – shaped boards instead of flat – Glove80, Dactyl Manuform family – ie. keeping key position right at the arc of travel of your fingertips
      • another option I just remembered (one that’s really popular with the ZSA Moonlander)
        • pick up one of the larger boards with hotswap sockets (Iris, Lily58, Sofle, Moonlander, Voyager) and start with a full layout
        • over time start removing keycaps and switches, remap your keybindings to fit the remaining keys
        • can try out the smaller layouts without having to invest in more boards until you find your comfort spot
      • @[email protected]OP
        1•1 year ago

        Also, the Moonlander has people saying the tenting is uncomfortable, and to go with the ergodox ez instead… I’m just unsure because there is so many to choose from, but most of them are so expensive that I’d have to buy one and stick with it for years to come.

        • @[email protected]
          2•1 year ago
          • tenting is a very subjective choice – and once you start worrying about optimizing tenting, then you start looking at keywell keyboards and figuring out how to optimize the generation parameters for your own Dactyl …
          • Keebio might be a better starting point over ZSA – most of their boards are sold as kits but with the SMD soldering taken care of so you just have to worry about assembly
            • Iris is their specialty and they have pre-built options available
            • they’ve also recently started offering a pre-soldered kit for the Breeze keyboard if you need a few extra keys
          • it’s perfectly okay to plan to stick to one keyboard for a few years – switching from a regular keyboard to a columnar stagger keyboard is going to take time, learning layers is going to take time, learning a new layout will take time – this is a personal journey to find your comfort spot
        • @glitches_brew
          2•1 year ago

          Every single one of my coworkers who had an ergodox ez now has a moonlander and they are unanimously happy with the upgrade. Tenting is at least an option with the moonlander.

          I have the falba redox which is very similar to both layouts and is by far the best tenting on any keyboard I own. Might be a third option if you’re seriously considering the other two.

          Link since formatting isn’t working: https://falba.tech/product/redox-full-assembly-services-of-keyboard-pcb-arduino-electronics-and-cable-etc/

      • @glitches_brew
        1•1 year ago

        Oh man, you just reminded me I have a glove80 in a box untouched somewhere. Does Lemmy have the equivalent of a mech marketplace? I should sell it lmao.

      • @[email protected]OP
        1•1 year ago

        Another thing: I use Blender. Is it possible / feasible to reduce key count that much when blender has this huge amount of keyboard shortcuts? I think if I were to buy an ergo keyboard, I’d gravitate towards the moonlander for this reason.

        • @[email protected]
          2•1 year ago
          • similar to using a phone keyboard, everything goes in layers – once you get into the 30% or “small” range, more effort is put into “optimizing” your layout than even into designing the ideal physical layout – you have Ben Vallack doing production work on an 18-key split and people coding on steno keyboards
          • but since everything is on layers, you can dedicate an additional layer to something like just Blender shortcuts (and one to just Photoshop shortcuts and one to just Python coding and so on)
          • this is not a fast journey and I would not recommend jumping into the deep immediately with a Hummingbird – start with something like a Moonlander and slowly acclimate yourself to removing keys and offloading things onto layers, customizing those layers to your needs
            • as an aside, a lot of people who go down the rabbit hole also use the chance to move away from QWERTY as well, with Colemak-DH being a popular alternative – the context switching between learning Colemak on columnar and keeping QWERTY on row-stagger often is enough to not mess up muscle memory
    • @glitches_brew
      2•1 year ago

      My two cents:

      Choc (low profile) switches are awesome for portable keyboards, but if you lean tactile, it’s going to be hard to find a satisfying switch. Khail sunsets are the closest I’ve come to my cherished Zealio V2s. I’d recommend looking around for a sample pack.

      Two more cents:

      I switched from a lily to a pinky3 a year or two ago and thought the same thing about reducing keys. It was a slight adjustment at first but I absolutely love it now. Typing on a 4 row keyboard is slightly annoying to me at this point. Why should I have to move my fingers so far just to type a single number? I found that having a number layer across the top row and a right side num pad connecting to where the 7 - 8 - 9 is on that row has been wonderful.

    • @[email protected]
      2•1 year ago

      The unicorne is what I was thinking of, fully assembled in terms of the PCB (other than switches) which is less common for these boards. I’ve personally started to like low profile switches a lot, the reduced travel works really well for ergonomic layouts reducing finger movement. I will say they are not as refined as some of the recent mx style switches in terms of feel and sound, but ones like the sunset tactile switches are very good. Keycaps being the other limiting factor, chocs use different keycaps and there are not a lot of excellent options at the moment, but there are enough decent options that they’re usable.