So my Sofirn SP10 Pro was freaking out today. I don’t think it was some weird mode I got into but whatever it was, I couldn’t get out of that messed up state. As I was going to bed I realized and Anduril is awesome and there must be some reset procedure. Looked it up and had my flashlight working again and back in advanced UI in under a minute.

I really appreciate ToyKeeper and the awesome programming she has done.

  • @bpcompOP
    link
    English
    21 year ago

    I don’t know about fan control but Anduril does support RGB aux lights. Here is the Anduril manual showing how to change RGB colors of the aux led.

    • AItoothbrush
      link
      fedilink
      English
      21 year ago

      Yeah but anduril only has low and high for every colour while i want gradual(prolly 8 bits) control of all three channels(rgb)

      • @bpcompOP
        link
        English
        11 year ago

        Fair enough. Seems like it could be programmed in but I don’t know if it requires more memory or processing than is standard for flashlight controllers. But if it’s a custom light, then you can design your control board to have more umpf and use a customized firmware.

      • @jerv
        link
        English
        11 year ago

        I believe that with the aux lights, it’s a hardware limitation.

        The TiTS10 has the new multi-channel Anduril that allows you to enable each color of aux as a channel; try 9H from On and keep holding. However, it only has them on High with 1H/2H doing nothing. You can 3C between them and normal operation (Channel 1; main emitters), but that’s it.

        • AItoothbrush
          link
          fedilink
          English
          11 year ago

          Yeah the chips dont have enough I/O. I couldnt find any vidoes showing the aux of the TS10. I could maybe have another chip store the values of rgb so you can set them with 1H for each colour and then go back to normal operation.