• @lefty7283OP
    link
    English
    57 months ago

    So this is my third time shooting NGC 7380 (previous pics were from 2018 and 2020). This time around I decided to go with a different false-color palette (exact details below) compared to my prior true color and Hubble palette pics. Captured over 4 nights in Nov/Dec, 2023 from a Bortle 9 zone.

    Places where I host my other images:

    Flickr | Instagram


    Equipment:

    • TPO 6" F/4 Imaging Newtonian

    • Orion Sirius EQ-G

    • ZWO ASI1600MM-Pro

    • Skywatcher Quattro Coma Corrector

    • ZWO EFW 8x1.25"/31mm

    • Astronomik LRGB+CLS Filters- 31mm

    • Astrodon 31mm Ha 5nm, Oiii 3nm, Sii 5nm

    • Agena 50mm Deluxe Straight-Through Guide Scope

    • ZWO ASI-120mc for guiding

    • Moonlite Autofocuser

    Acquisition: 12 hours 48minutes (Camera at unity gain, -15°C)

    • Ha - 33x360"

    • Oiii - 52x360"

    • Sii - 43x360"

    • Darks- 30

    • Flats- 30 per filter

    Capture Software:

    • Captured using N.I.N.A. and PHD2 for guiding and dithering.

    PixInsight processing:

    Preprocessing

    • BatchPreProcessing

    • StarAlignment

    • Blink

    • ImageIntegration per channel per panel

    • DrizzleIntegration (2x, Var β=1.5) per panel per channel

    • StarAlignment in mosaic mode to align the two panels, then GradientMergeMosaic to combine them

    Linear:

    • DynamicBackground Extraction

    duplicated each image and removed stars via StarXterminator. Ran DBE with a shitload of points to generate background model. model subtracted from original pic using the following PixelMath (math courtesy of /u/jimmythechicken1)

    $T * med(model) / model

    • BlurXTerminator

    • NoiseXterminator

    • Duplicated images, to be used later for stars only processing

    • STF applied via HistogramTransformation to bring nonlinear

    Stars processing:

    • Extracted stars-only pic using StarXterminator

    • Pixelmath to make color SHO --> RGB image

    • SpectroPhotometricColorCalibration (narrowband working mode)

    • ArcsinhStretch + HT to bring nonlinear

    • SCNR > invert > SCNR >invert to remove greens and magentas from stars

    • Stars only pic saved for later addition to starless pic

    Nonlinear:

    • StarX to remove all stars

    • PixelMath to create color image in OSH --> RGB palette

    • PixelMath to make a second image using Jimmy’s Royal Palette:

      R = 0.3*Oiii+0.7*(Oiii^~(0.7*Ha+0.3*Sii))^1.2

      G = ((Oiii*Ha)^~(Oiii*Ha))*Ha + ((Oiii*Ha)^(Oiii*Ha))*Sii

      B = 0.9*Sii+Ha-Oiii

    • PixelMath to blend OSH and Jimmy pics together 50:50

    • LRGBCombination using stretched Ha as luminance

    • shitloads of CurveTransformations to adjust hue, lightness, saturation, etc. (some with lum masks)

    • another round of NoiseXTerminator

    • Extract L --> LRGBCombination for chrominance noise reduction

    • LocalHistogramEqualization

    • More curves

    • MultiscaleLinearTransform

    • Relinearized narrowband and stars images to add in the stars only image

    “unstretched” both images with histogramtransformation midtones set to 0.9999

    pixelmath to just add those two images together

    histogramtransformation to un-relinearize them by setting midtones to 0.0001

    • Even more curves

    • Resample to 60%

    • annotation

    • @L3mmyW1nks
      link
      37 months ago

      Holy moly! How long does it take you to finalize an image? Can you re-use most of your previous settings or is every image unique?

      • @lefty7283OP
        link
        English
        27 months ago

        it takes a few hours to process it all. I have a general workflow that I use, but it’s not like I can just copy/paste all the processing steps from one image to the next

        • @L3mmyW1nks
          link
          English
          27 months ago

          And here I am, struggling with even the barest adjustments of image parameters… Thank you for your efforts!