• @Blue_Morpho
    link
    1311 months ago

    I use trig every few years when buying a tv. Tv specs always list diagonal but rarely horizontal and vertical which is needed for knowing how a TV will fit in a space.

    • @[email protected]
      link
      fedilink
      English
      1311 months ago

      I’m trying to figure out how you need trig for that. Just the Pythagorean theorem and ratios seem sufficient to me.

      • @[email protected]
        link
        fedilink
        211 months ago

        Ratios can be used in trig – if it’s 1.5 times as long as it is tall, tan(\theta) = \frac{2}{3}, which then allows you to find the lengths of the other two sides easily so long as you have a calculator.

        • @[email protected]
          link
          fedilink
          English
          211 months ago

          Right, but why bring theta into it at all? TV screens are as a hypotenuse (a²+b²) with a fixed ratio (a/b=16/9), so you just need to solve for a and b.

          • @[email protected]
            link
            fedilink
            1
            edit-2
            11 months ago

            You don’t have to, but it seems perfectly easy since you don’t have to write anything down to solve it. c*sin(arctan(b/a)) gives b, and c*cos(arctan(b/a)) gives a. I’m not disputing that you can do it without, but I don’t think it’s necessarily any quicker or easier.

      • @[email protected]
        link
        fedilink
        111 months ago

        I am trying to figure out why you’d even need that.
        The measurements of the product is usually written in the tech spec.

    • @ComicalMayhem
      link
      311 months ago

      I mean unless you’re able to do it in your head in less than a minute, bringing a tape measure would probably be faster and easier.