Hello! I havent printed too much, but have done enough to start looking at upgrades for my Ender 3 V2 with the stock V2.2 board. Mainly I’ve figured out that I want to go with a direct drive extruder and a more convenient hot end but as 3D printing has progressed a bit since I originally got my 3D printer to now I am having mild trouble on figuring out what is outdated information vs current. For example, im looking at something like a Micro Swiss DD with NG Revo hot end for simpler nozzle swaps but im not sure if there is a better solution.

Currently I primarily print with PLA but I have some TPU I want to print with and I may want to dabble in more abrasive filaments and potentially in the future I may want to look into some sort of multi filament system similar to an AMS but that is much down the road.

  • @NindelofochoOPEnglish
    1•10 months ago

    So yes, sorta. I was having some weird underextrusion and binding with the extruder which made me think the nozzle was clogged so I cleaned it and did several cold pulls to no avail then the problem just sorta slowly stopped happening. I realize now it could have been inconsistencies in the filament (Inland PLA +) Right when I stopped printing I started to have issues with my parts not adhering to the bed at all, tried some solutions both in the slicer, glue, tape ect and leveled the bed a bunch of times, last time I did it I leveled it really close to the nozzle to the point that it was really smushing the first layer into the bed which caused prints to stick entirely too well so Im pretty sure I know where that problem lies but im looking to get a flexible magnetic bed anyways. I know a hot end and extruder really wouldnt affect that of course. I just love tinkering with it which is half the reason I want to upgrade. Just looking for a little nudge in a direction so I can do some tinkering but not so much tinkering that im not able to enjoy what im tinkering on.

    Funnily, my friend is practically giving me his old Ender 3 this week so Ill still have another printer to also mess around with. Who knows, I may build a Voron down the line.