So I realized I posted that other message a few times. I removed the old ones with out comments

Lemmy wasn’t showing them so I kept trying and now I see there were a few of the same posts.

Anyways,

Problem: Speed wobble over 25mph and during specific road surface and load distribution scenarios.

Attempts: Elastic cord tensioner scheme.

  1. Used a old dropbar clamp to make a attachment point on the left side of fork to mirror steering linkage arm on right side.
  2. Adjustable tension loop to frame. Max elongation set at furthest turning point. Created feedback spring effect that was fine but felt funny. Removed.
  3. Adjustable tension loop from left bottom of frame to steering arm. Goal was to put tension on system to reduce harmonics. Still installed

Solution: Replaced headset top half with Cane Creek Viscoset ZS 44/28.6

Big thanks to Kash at WarmPlanetBikes for the tip!

New top speed is 43 mph downhill. *not with kids of course…

    • SundanceOPM
      link
      11 year ago

      Send a picture of the underside of your cargobike, steering system, and front headset

      • @richie510
        link
        21 year ago

        I’m not sure if these pictures are enough. Let me know.

        • SundanceOPM
          link
          11 year ago

          It looks like it’s a match. 1.5 inch external bearing headset.

          That’s what I have.

          Can we send DMs here?

        • SundanceOPM
          link
          11 year ago

          Amazing. I think I have a spare of the ViscoSet dampener headset that fits your headset. Any chance you can get share model info for the bike or the headset.

          I’ll send you this spare if it fits