I’ve been experiencing instability with my system, and I’m beginning to suspect that the PSU is either faulty or under-provisioned. I’ll get random crashes (reboots, more specifically), mostly when doing something intensive on the system like starting up a game. Looking at all the crash logs, I can’t really find any errors that make sense to me. When the system goes down, all the lights & fans all die at the same time as the screen, then after a couple of seconds it comes back on and reboots.
I have a Corsair SF600 SFX PSU which is only 600W, and I’m powering a Ryzen 3700x, a AMD 5700XT GPU, a 1TB M.2 SSD, 32G ddr4 memory, 2 case fans, and a water-cooling pump. Plugging all of that into a calculator says that 600W is exactly enough, but is that right? Or could power-usage spikes be pushing things over the edge?
Edit: Sorry, CPU is a 3800X not 3700X. Just FYI
It’s about 4 years old, so not new but not crazy old. I’m also in a SFF case so I’m using a PCIE riser, which could also be the issue. Do you know, is there a way to tell if it’s the riser or the PSU? I can run memtest to check the memory.
I imagine it’s getting enough airflow. It’s a sff case, but the fans blow right over the PSU so it’s probably fine… Would there be a way to tell if it’s overheating?
I also have an SFF build, but as long as it’s getting cool airflow, should be fine. Only way to test temps is to get a laser thermometer. PSUs unfortunately lack much in the way of readable sensors.
I have heard riser cables sometimes causing problems. Only way I know to test is try a different one or pull everything out, plug the GPU directly into the slot, and run some bench tests that way.
And speaking of temps, what about your RAM? Is it getting enough airflow? As heat goes up, RAM stability goes down, so make sure it’s getting at least a little airflow. I’m paranoid, so I have a downdraft CPU cooler and exhaust fans right above that I know are giving mine some air.
Yeah. I’ve been desperately avoiding trying the GPU directly in the slot since the whole thing is water cooled w/ a custom loop and I don’t want to drain & re-plumb it. I might have to though, ugh. Next PC I build is going to be 100% air cooled haha
Yeah, maybe do that as a last resort…