It greatly depends on the traffic pattern here! I also mentioned this to another reply, but our county has IMO very poorly designed traffic patterns for road crossing. It will generally turn white with a walk sign for a few seconds, and then quickly shift to a flashing red hand indicator with a count down, which means you have X number of seconds remaining to walk until the full red hand (don’t walk) shows up. Flashing red hand symbol IMO is not the best indicator for “you can still walk.”
The times I’ve had this happen are at very large intersections that have 3 lanes each way on one side and 2 lanes per side on the cross road. With lead greens, and various traffic patterns the walk signs do follow a specific pattern, but there are also opportunities for right on red without the pedestrian having right of way. This mostly occurs during the transitional periods, and during lead greens, which can be a significant amount of time in intersections of this size.
Yes of course it’s the motorists job to avoid running over pedestrians, I don’t think that was ever a question.
That’s interesting, I never considered a flashing hand as an indicator to stop. It is timed to a slow walker, so I can tell whether it’s safe to cross if I can run across.
I would argue that the signal you should pay attention to is your red light. Which also doesn’t mean you can’t go through the intersection (this is bad policy in my opinion), but it does mean that you need to look out for and yield to people driving, and walking across the intersection.
It is generally not a good idea to bike on the sidewalk on the wrong side of the road. But sometimes that is the safest option.
Our county and state in general is miserable for biking and pedestrians outside of designated trails. I only know a handful of people who are serious about road biking, and multiple have been in serious accidents due to motor vehicles.
It greatly depends on the traffic pattern here! I also mentioned this to another reply, but our county has IMO very poorly designed traffic patterns for road crossing. It will generally turn white with a walk sign for a few seconds, and then quickly shift to a flashing red hand indicator with a count down, which means you have X number of seconds remaining to walk until the full red hand (don’t walk) shows up. Flashing red hand symbol IMO is not the best indicator for “you can still walk.”
The times I’ve had this happen are at very large intersections that have 3 lanes each way on one side and 2 lanes per side on the cross road. With lead greens, and various traffic patterns the walk signs do follow a specific pattern, but there are also opportunities for right on red without the pedestrian having right of way. This mostly occurs during the transitional periods, and during lead greens, which can be a significant amount of time in intersections of this size.
Yes of course it’s the motorists job to avoid running over pedestrians, I don’t think that was ever a question.
That’s interesting, I never considered a flashing hand as an indicator to stop. It is timed to a slow walker, so I can tell whether it’s safe to cross if I can run across.
I would argue that the signal you should pay attention to is your red light. Which also doesn’t mean you can’t go through the intersection (this is bad policy in my opinion), but it does mean that you need to look out for and yield to people driving, and walking across the intersection.
It is generally not a good idea to bike on the sidewalk on the wrong side of the road. But sometimes that is the safest option.
Our county and state in general is miserable for biking and pedestrians outside of designated trails. I only know a handful of people who are serious about road biking, and multiple have been in serious accidents due to motor vehicles.