Renovating the bathroom and found these dark patches in the joists and roof lumber surrounding the old vent pipe. The PVC part is new.

Anything bad here? Anything we need to address?

  • @davidalsoOP
    link
    128 months ago

    We had the roof replaced two years ago. I believe they redid all the flashing at that point. So there’s a chance this could be old? If the leak is resolved, which I’ll verify, do we have to do anything to the wood or are we good?

    • @cabron_offsets
      link
      25
      edit-2
      8 months ago

      They probably fucked up the flashing. Roofers and siders fuck up all the time. If it’s truly an old leak that’s been fixed, you have nothing to worry about. Go up there and observe during the next strong rain. Edit: grab a house key or a screwdriver, stick into the wood. Does it penetrate really easy? Then you’re fucked. Else you’re fine, as long as the leak isn’t active.

      • @davidalsoOP
        link
        68 months ago

        I mean I could just spray a hose up there, couldn’t I?

        • @cabron_offsets
          link
          98 months ago

          Yes, but it’d help if someone else observed and recorded to really nail down what’s happening.

          I had water penetrating the house after the siders fucked up. Took opening the ceiling and recording the penetration to really understand what the idiots did wrong.

    • @[email protected]
      link
      fedilink
      88 months ago

      It looks in the image like there might be some fungus. To me that’s a sign that it’s worthwhile to get someone professional to at least give it a look in person.

    • @EccentricaGallumbits
      link
      English
      58 months ago

      I’d call in a separate roofer for an opinion. There are some large gaps in your sheathing where you can see the weather wrap through, and boards that have obvious signs of water damage they left in place. I would want someone else to take a look at this and confirm it’s done right.

    • @Sam_Bass
      link
      17 months ago

      Might spray it with some antifungal just to reduce chance of mold forming