• Bakkoda
    link
    fedilink
    English
    33
    edit-2
    11 months ago

    My door thresholds from Lowes. Every single one.

    • @[email protected]
      link
      fedilink
      English
      2111 months ago

      It needs oil. Oil will break down the adhesive and shouldn’t be hard to clean off of a sealed/finished surface. I’ve used anything from a few drops of cooking oil to peanut butter (doesn’t run!) and let it sit. Depending on the adhesive it could take minutes or hours, but typically makes removal much easier.

    • @riodoro1OP
      link
      English
      1011 months ago

      Make sure to use a solvent that damages that surface. Easy peel stickers are apparently yet to be developed.

      • @clearedtoland
        link
        English
        411 months ago

        Goo Gone. Or WD40. Works for asshole-designed stickers and bandaids!

      • Bakkoda
        link
        fedilink
        English
        311 months ago

        Vinyl stickers cut into bottom lines. I’ve got gallons of mineral oil, did the trick.

  • HubertManne
    link
    fedilink
    1011 months ago

    I feel for this one. This is such a stupid common thing. I also hate the thing where packaging was made more difficult to discourage returns but that thankfully has at least reduced from its height.

  • @Mango
    link
    English
    1011 months ago

    It’s so you gotta buy a second scraper.