Does anyone have any advice on hosting a server to the outside world? I intend to host a Jellyfin media server and want to be able to access it remotely. I was leaning towards hosting a VPN on my network with a good password but I don’t know much about that. I am looking for a free option that ideally doesn’t require proprietary software and can be completely hosted locally. For reasons that I won’t go into, I am a little concerned about my isp seeing the traffic to the media server. I know I am being paranoid but I don’t really care. I imagine if I host it through port forwarding on the router but set up HTTPS that would encrypt the traffic and stop my ISP from seeing it, but I don’t know if hosting a VPN would be easier / more secure. Thoughts?

  • @[email protected]
    link
    fedilink
    31 year ago

    If you are ok with Jellyfin being public, then I would just put it in front of an nginx proxy. That way, your nginx proxy will handle SSL termination. With SSL, your ISP won’t be able to inspect the traffic directly.

    If you are running docker, then I’d recommend jwilder/nginx-proxy and its lets encrypt companion jrcs/letsencrypt-nginx-proxy-companion. It makes putting things behind an SSL proxy very easy! This of course assumes you have a public IP address through your ISP and aren’t stuck behind CG-NAT!

    A second option is to keep it private then use a VPN (this is what I do). Wireguard can be a good option although setting up each device is a bit manual, since you have to generate key pairs for each of them. This also requires you have a public IP through your ISP or have a public box that bridges your public VPN to your home network. That said, it works really well.

    Tailscale is a free, but commercial option built on top of wireguard that makes set up a lot easier. If you are stuck behind CG-NAT this is probably your easiest option.

    • @[email protected]
      link
      fedilink
      11 year ago

      To Hijack this: If I wanted to host a public instance of jellyfin at jellyfin.mydomain.xyz, I would then need a dDNS hosted on my server, and then…? If I want to allow non-technical people to access my instances, how do I manage that? Could you point me to a guide that explains the overarching requirements that one would need for that, with a mention of examples for each service I need to host that I need to achoeve this? Because I am a bit lost atm :p

      • @[email protected]
        link
        fedilink
        English
        21 year ago

        If you are running Jellyfin on a computer at home you’ll need to configure your dns with your dns provider to point to your home public ip then configure your router to forward port 443 to your Jellyfin server.

        • @[email protected]
          link
          fedilink
          English
          11 year ago

          And this works even with a dynamic/non-static IP? I thought there was more hassle involved :D

          • @[email protected]
            link
            fedilink
            English
            11 year ago

            No, if you don’t have a static IP, you will need to use a dynamic DNS solution.

            You might also investigate ipv6 if your ISP provides it. Often, if they don’t give you a static ipv4 address, they might assign you a static block of ipv6 addresses you can use. That makes a big assumption that you can always use ipv6 though!

  • @[email protected]
    link
    fedilink
    2
    edit-2
    1 year ago

    Probably the easiest solution would be to use Tailscale. Although it’s not open source it is free.

  • @[email protected]
    link
    fedilink
    21 year ago

    VPN is probably the easiest since you can use tools you’re probably already familiar with, like RDP. But Guacamole is a pretty slick web interface for remote desktop to internal servers.

    As far as encrypting jellyfin traffic, I’m not familiar with the specific details, but I imagine it has something similar to Plex where you check a box to require encrypted connections. With that enabled, the ISP can see that you’re sending traffic over port X to IP Y, and how much traffic you’re sending, but they can’t see what the traffic is.

    • @[email protected]
      link
      fedilink
      11 year ago

      the ISP can see that you’re sending traffic over port X to IP Y, and how much traffic you’re sending, but they can’t see what the traffic is.

      This is true, but if they see lots of traffic to port 8096, they will be able to deduce that you’re running a emby or jellyfin server, just not what content you’re hosting on it.

      If you want to prevent them from knowing that, you should look into housing your own vpn like wireguard or openvpn (both open source).

  • @[email protected]
    link
    fedilink
    11 year ago

    Hosting a VPN is going to be the easiest and most secure option. There are a lot of little things that might make exposing Jellyfin tricky and could risk exposing traffic.

    I would suggest starting out with a simple Wireguard VPN, which has worked for me for a while, but eventually you might consider looking at Tailscale, which simplifies a lot of it. (You can completely self host it using the Headscale server). OpenVPN has more options and its a little easier to add more devices, but it’s not as fast.

  • Eddie Hitler
    link
    11 year ago

    I’m not sure if I’m understanding this one. But assuming that you’re hosting your own server and you work away from home and want to connect in on the weekends. If you have https forced and it’s also on in the app you’re using to connect, any traffic between your end and the server is automatically encrypted. The only thing your ISP is going to see are data packets going from you to your server back and forth. Same if you’re hosting for 10 users. All of VPN does is give you another point hop between the server and your client. Vpns are useful if you’re trying to to block your ISP from seeing that you connect to a certain site on the internet. But just logging in remotely to your server it’s absolutely useless.