I installed it from the Calamaries Installer found in the LIVE USB ISO this time. And Instead of my primary hdd, I installed it on the other one. Works now, thanks for all of your support, dear nerds.

  • @[email protected]
    link
    fedilink
    49
    edit-2
    3 months ago

    I dont know how you flashed the usb, but it seems like the installer is damaged. Try redownloading the iso, check the file hash, flash the usb drive with balena etcher and reinstall.

    Did you change the partition layout in the installer?

    • @senilelemonOP
      link
      20
      edit-2
      3 months ago

      Okay, I will try again with a live-boot USB this time

      edit: Thanks so much! This finally worked

          • @[email protected]
            link
            fedilink
            13 months ago

            Oh my mistake. I thought it was you, and you modified the default partition options.

            So if you have modified default options in the partitions screen, then my comment is relevant. Else just ignore it.

  • 🧟‍♂️ Cadaver
    link
    19
    edit-2
    3 months ago

    This error (hd0) is typical of legacy (BIOS) booting end happens solely because of the MBR. GRUB2 is hit or miss with MBR.

    If you’re not planning on dual booting with Windows XP/Vista/7, I’d recommend going to your motherboard settings and changing the boot mode to UEFI.

    Then reinstall Debian. That will automatically sort things out :)

    • Norah - She/They
      link
      fedilink
      English
      43 months ago

      I strongly suspect that it’s the motherboard’s boot mode as well. The Debian installer will use an MBR partition table if your system uses BIOS boot.

    • exu
      link
      fedilink
      English
      23 months ago

      I thought the only reason to still use GRUB2 was its MBR support.

      We really should be moving on at this point.

          • @netvor
            link
            12 months ago

            Time to rehearse our new well-actually hymn: “What people commonly call Linux is actually GNU/Systemd/Linux…”

  • @[email protected]
    link
    fedilink
    English
    173 months ago

    Interesting. Looks like perhaps your boot loader isn’t properly pointing at your root partition.

    I’m assuming you’ve just done the install and never successfully booted, yes? In that case, you can try to re-run the installer, or try rescue mode and try repairing the bootloader.

    Are you doing dual-booting, or is this system dedicated to Linux?

    • @senilelemonOP
      link
      73 months ago

      Yes, I have not been able to successfully boot yet. I have already rerun the installer and tried every solution I could find online in rescue mode. Tried repairing grub too.

      No, I am not dual-booting.

      • @[email protected]
        link
        fedilink
        13 months ago

        Were you able to get this fixed? Have you changed boot settings like uefi and secure boot in your bios?

        • @senilelemonOP
          link
          13 months ago

          Yeah I just gave up on my primary and installed it on my secondary disk. My problem is gone now.

  • @[email protected]
    link
    fedilink
    143 months ago

    Look for a key in your keyboard labelled as “any” and press it. Setup should run fine afterwards.

  • Adderbox76
    link
    fedilink
    English
    93 months ago

    It’s been a long time since I last installed Linux on a two hard-drive system, so take this advice as “likely not necessary, but will probably fix your issue”

    The installer asks whether or not you want to “replace” the existing OS or install alongside. And if you’re fairly new to linux (like I was at the time) it can be tricky to see at a glance which hard-drive you want to install it to and which you don’t.

    So to be doubly cautious and make sure that didn’t happen, I simply unplugged my secondary harddrive during the install so that the installer would automatically be reading the correct one. Then all I had to do was choose “replace” or “install alongside” without worrying about anything else.

    The drawback to that was, once the install was complete and I re-attached my second drive, I had to configure it to auto-mount and do some work on that, but at least my computer was working.

    • Corgana
      link
      fedilink
      63 months ago

      I do that too! And fwiw haven’t had to manually configure auto-mount for other drives in a while.

  • @kolorafa
    link
    9
    edit-2
    3 months ago

    Looks like the installer and grub is confused about the hard drive order different in instaler and different while booting, both those drives could also have the same partition/drive ID making it confused, that could happen if you cloned/copied the drive in the past

    I would say as a easy and safe solution

    1. unplug all other drives that you don’t want install linux
    2. Install Linux (best by formatting whole drive) - it should work just fine at this point
    3. After confirming everything works - connect the other drives back
    4. If Linux no longer boots after adding drives then tweak disk boot order in BIOS
  • @senilelemonOP
    link
    93 months ago

    This is the screen a few seconds afterwards

    • @[email protected]
      link
      fedilink
      73 months ago

      Absolutely not an expert or anything, but is it possible that the partition of your harddrive that you’re trying to install Debian on (hd0) is too small?

        • @[email protected]
          link
          fedilink
          33 months ago

          The original error actually makes it sound like there’s a partition on hda that’s bigger than hda itself.

          • @senilelemonOP
            link
            33 months ago

            Partition size wasn’t specified in any step of the setup. If that is the issue, Is there any way to fix it?

            • @[email protected]
              link
              fedilink
              23 months ago

              At some point, the installation should ask you the driver on which it should be installed and also how the driver should be interacted with; i.e full wipe and then installation or only specified partitions. You specified elsewhere that you don’t intend to dual-boot. Hence, selecting the correct drive and following the instructions for full wipe + installation (which should be regular/default installation) should have been sufficient.

    • @[email protected]
      link
      fedilink
      English
      5
      edit-2
      3 months ago

      Considering that it has a 2020 firmware, and is built by “to be filled by OEM”, my completely unfounded wild guess is that the system firmware has broken legacy boot support. From other posts here, I gather you’re using a legacy dos-style partition table. Try installing again with GPT/EFI instead.

  • @[email protected]
    link
    fedilink
    English
    83 months ago

    Hi, it would be useful to know what kind of device you are installing on. For a laptop the model and make would be especially useful. If it is a PC then the drive configuration would be interesting (what kind of drive, how many etc.)

    • @senilelemonOP
      link
      6
      edit-2
      3 months ago

      It’s a PC. Two Hard Disk Drives

      1st Drive: SATA:PM-KINGSTON S

      2nd Drive: SATA:SM-ST500LT012

      edit: 1st one is of around 138GB, 2nd one has around 500GB

      • @[email protected]
        link
        fedilink
        English
        53 months ago

        Ok, that looks like a fairly standard setup. I guess taking a look at the boot loader itself would be the next step. When you see the Debian bootloader you could try pressing ‘e’ to view what commands it uses internally to boot. The lines starting with “linux” and “initrd” would be most interesting.

          • @[email protected]
            link
            fedilink
            English
            43 months ago

            So it still uses a MSDOS partition table, interesting. This usually only happens on systems that do not support EFI at all.

            Is your BIOS and main board fairly old per chance?

  • @[email protected]
    link
    fedilink
    5
    edit-2
    3 months ago

    Could you describe what has transpired before? Have you actually installed Debian? Are you still trying to boot into the install medium?

    Perhaps sharing device specs might be helpful.

    • @senilelemonOP
      link
      53 months ago

      This is after installing debian and booting it up. I used the “complete package” Iso they offer.

      • @[email protected]
        link
        fedilink
        -13 months ago

        Together with all the other information you’ve shared, it’s not entirely clear why it has failed; at least to me.

        If you’re not married/tied to the installation of Debian, may I suggest installing Linux Mint, Pop!_OS, Tuxedo OS or Zorin OS instead?

        There are of course many other distros you could choose, but the earlier mentioned ones are ‘stable’ like Debian is. I thought that perhaps it was what attracted you towards Debian in the first place.

        • @senilelemonOP
          link
          43 months ago

          Yeah, I couldn’t find a good solution online either. Maybe It was a bit flip? Guess the universe sent a high velocity particle at my PC from lightyears away just to ruin my day, that’s the only explaination I have after seven hours of looking online.

          Sure, I’ll check out some other distros.

          • @rekorse
            link
            13 months ago

            I setup popos and EndeavourOS recently, very easy to install. Learning them was about equal IMO, they have different ways of doing things. I liked PopOS initially because its supported by a company that has financial incentive to make sure it runs reliably.

  • lemmyreader
    link
    fedilink
    English
    33 months ago

    Is this a desktop computer ? Two hard disks can make things more difficult. How about taking the power cord temporarily off from the larger disk, then install, and if it’s successful then turn it off and give the 2nd disk power again, and add that 2nd disk manually to the fstab as e.g. /opt/ as mount point.

  • @[email protected]
    link
    fedilink
    13 months ago

    I’d say grub is having trouble with your hardware (mainboard or disk maybe).

    You could try to update your mainboard’s firmware, or install another bootloader (or maybe just a newer version of grub). I’m not sure what the easiest way to get a different bootloader is. I don’t think Debian’s installer offers anything besides grub. Maybe other people can point to a distro where installing something other than grub is easy.

    Because switching out the bootloader on an unbootable system (i.e. not from the installer) is going to be whole pain in the butt involving booting into a live usb, mounting and chrooting and god knows what.

    • @senilelemonOP
      link
      13 months ago

      This works perfectly! Fedora actually installed like a normal distro on my primary disk. Since my primary is faster, I will remove debian from my secondary now.

      You can have my upvote, lmao.