So this is probably a dumb question, but I got a refurbished OLED and plan to pop my 2tb drive from my LCD model into the new OLED.

This should just be plug and play right? I don’t see anything about the OLED decks using a different OS or firmware or anything.

EDIT: Thanks for the feedback y’all! I’m going to try it and see what happens. I’ll report back if anything funky happens. Not a big deal if I end up needing to reformat the drive.

EDIT2: Replaced the stock OLED drive with the 2tb drive from the LCD this morning, and so far so good - no issues to report.

  • @A7thStone
    link
    67 days ago

    I did exactly what you are planning to do. I had put a 2TB drive in my LCD and just swapped it to a new OLED. It asked me to update as soon as it was installed, but it worked just fine.

  • @[email protected]OP
    link
    fedilink
    15 days ago

    Replaced the stock OLED drive with the 2tb drive from the LCD this morning, and so far so good - no issues to report.

    Even my modded games (New Vegas, Witcher 3) carried over with no problems.

  • @vinnymac
    link
    97 days ago

    I’ve cloned drives from an existing steam deck onto another brand new drive for a new steam deck. The swap you are doing should work the same without issue.

  • @[email protected]
    link
    fedilink
    English
    6
    edit-2
    7 days ago

    Dont know if it will work, but I think it’s worth a try. If it doesn’t work you can reset it or swap it back

  • @[email protected]
    link
    fedilink
    37 days ago

    I’ve done this one Linux desktop and had zero issues. It was 100% plug and play. SteamOS is Arch Linux with some modifications. So, I’m pretty sure it’ll be fine. If anything, put back the old drive.

  • trevor
    link
    fedilink
    English
    37 days ago

    I’ve cloned a drive from my LCD to use in my OLED. It’s mostly fine, but occasionally (every few days), the interface would crash. Weirdly, those crashes went away with time, so maybe an update resolved the crashing I was experiencing?

    If you want to reliably leave your games on standby for any amount of time, it’s probably best to use a fresh image instead of reusing the existing installation from the LCD model.

  • @wonderfulvoltaire
    link
    -57 days ago

    Hear me out: install Bazzite & cut paste your old home folder into your fresh install using an nvme enclosure.

      • @wonderfulvoltaire
        link
        17 days ago

        Bleeding edge kernal, atomic distro which means more power & customizability to the user.

          • @wonderfulvoltaire
            link
            17 days ago

            SteamOS is immutable with the option to disable the read-only system. Bazzite is atomic because with the use of scripts you can modify the system in ways that do not break stability. You can view the FAQ if you’d like: "Since Bazzite is a custom Fedora Atomic Desktop image, it makes use of read-only root files for stability purposes, and is built with libostree which has advantages such as:

            • Low risk of an unbootable system
            • Rollback system updates if necessary, and the ability to pin your current deployment as a backup save state without losing user data.
            • Smooth upgrade process from major Fedora point releases.
            • Layer Fedora packages to the host that survive between updates.
            • Focus on containerized applications that do not interfere with your host system." I’m not associated with them I’m passionate about the usability & convenience of their implementations.