Update: it was removed by washing again with the heavy/high soil mode

  • palordrolap
    link
    fedilink
    312 days ago

    Yeah, I used pods for a few years. Went back to plain old liquid because this would happen once in a while. Or else this stuff would start gumming up the seals or out of sight waiting for the next time I used the machine.

    As for the cause(s) take your pick from: water too cold, not enough water, tangled item(s) creating temporary pockets that only open up late in the cycle (which could be caused by:), overloaded machine.

  • @Coreidan
    link
    English
    82 days ago

    Cum

    It’s cum

    You got cum

  • @DaddysLittleSlut
    link
    31 day ago

    Thank god I’m not the only one. My first thought major cum sesh

  • HubertManne
    link
    fedilink
    132 days ago

    I never understood the pods. I get this liquid detergent with a pump where one pump is like one pod. No opening a pod container just grab and squirt one to three times depending on load size.

    • Transient Punk
      link
      fedilink
      English
      142 days ago

      I’ve never understood the liquid soap. It’s more expensive by weight than powdered detergent, but a sizable chunk of the liquid detergent is just water…

      • Bahnd Rollard
        link
        142 days ago

        Its all marketing, the powder v liquid is a fair consumer product debate (the different formats allow for different chemistry, but by weight/price, powerd is most efficent), but the pods for dish and clothes washers are meant to be as inefficent of a storage method as possible to get you to buy more product.

        The youtube channel Technology Connections has several hours of midwestern rants about how bad pods are.

      • @ComicalMayhem
        link
        12 days ago

        For laundry? I thought liquid detergent is actually super concentrated, such that you need way less than what the little measuring cup says you need.

      • @[email protected]
        link
        fedilink
        22 days ago

        I use tap cold water for most loads. When I use powder I dissolve it in a cup in a bit of hot water before mixing it with the cold. It does a better job of cleaning like that.

        If I was super rich I’d probably still use cold water so the clothes lasted longer, but I might switch to liquid detergent so I don’t have to dissolve.

      • @[email protected]
        link
        fedilink
        English
        22 days ago

        And it’s getting harder to find powder. Try finding powder dishwasher detergent… locally, nothing.

      • HubertManne
        link
        fedilink
        12 days ago

        Not needing to measure is convenient. It not like the dishwasher were you have an area to put it in that gets the right amount and of course the amount varies based on load so it would be pretty hard to.

    • Mbourgon everywhere
      link
      42 days ago

      Never seen that before, you have my interest! Any idea what brand this is?

      • HubertManne
        link
        fedilink
        42 days ago

        method. oh but I made a mistake. Its two squirts per load size so 2-6 depending but I don’t think I have ever used 6 even on large loads and it works fine. I find it the most convenient for laundry and it seems as good as your going to get for the environment at a fair price.

  • @EtherWhack
    link
    142 days ago

    It looks like it. I use gain ones and if I do a cold wash cycle less than 40 (or so) minutes, the casing doesn’t always get fully dissolved.

  • @[email protected]
    link
    fedilink
    21 day ago

    Left a tissue in your pocket? Maybe the detergent got caught in a fold and didn’t get a chance to get rinsed out?

    • @qisope
      link
      42 days ago

      yes, this is the way. none of the excess bulk, weight, and transport costs of a liquid detergent; none of the it’s-not-cum-i-swear stains of a pod.