My Uncle in the 1970s taught me how to make a cannon that went boom with just tin cans, electrical tape and Rossignol fluid, taped together and holes in the first few cans. Made a very loud boom. How was this made?

  • @Starbuck
    link
    English
    71 year ago

    Check out aerosol spud launchers, that might give you some ideas.

  • @Ocelot
    link
    61 year ago

    We used to make those too. We called them tennis ball canons. You pretty much described the whole thing. Make a big tube from a bunch of cans taped together and put a hole in the bottom one. Squirt lighter fluid into the hole, put your tennis ball in the other side, and light the lighter fluid through the hole.

    • @CamzingOP
      link
      English
      21 year ago

      But holes had to be put in one chamber, not sure which one, I brought it in for show and tell grade 5 lol

      • @Ocelot
        link
        61 year ago

        All of the cans had both ends cutout of them except one…the bottom can. The end of the tube was sealed by that end of the can. On the side of the can just an inch or so from the end you put a hole large enough to squirt in the lighter fluid. I remember some kids shaking the tube to try and get the lighter fluid throughout the tube and not just in the end, but I never noticed that helped.

        • @CamzingOP
          link
          English
          31 year ago

          So first can has holes on one end and other side is cut half way. All other cans are cut both ends. Thank you.

      • @Ocelot
        link
        21 year ago

        All of the cans had both ends cutout of them except one…the bottom can. The end of the tube was sealed by that end of the can. On the side of the can just an inch or so from the end you put a hole large enough to squirt in the lighter fluid. I remember some kids shaking the tube to try and get the lighter fluid throughout the tube and not just in the end, but I never noticed that helped.

  • @crac_roc
    link
    31 year ago

    In my country ppl stll use this during new years.