Both are on sale at Costco, at the moment.
$109 https://www.cyberpowersystems.com/product/ups/battery-backup/cst135uc2/
Or
$170 https://www.cyberpowersystems.com/product/ups/battery-backup/cst1500suc/
I got a rig with a i9-14900 with a 4070ti Super, but with local brownouts I was hoping either one will cover it. Hoping to go with a cheaper option, but if the group consensus is the more expensive option I’ll go for it. Thanks for the help! 🤞🤞
Lately I’ve seen 2 brownouts, and fortunately I wasn’t using the computer either time. 🤞
Then I’d opt for the better one, because you don’t see all brownouts, only the ones that are long enough to affect lights and more sensitive devices. I have one touch light that would go out when everything else would be fine. So you most likely have very “dirty” power, at least in the room you see this going on.
I’ll also add that since putting my UPSs in, occasionally I’ll have them click. It’s not registering as anything on the software monitor, nothing I can see via lights, but I’m sure it’s breaker or whatever they use to step in and keep things clean.
They usually aren’t common, but started this year during the summer in SoCal. Likely due to Southern California Edison, but most the locals are peeved. I just want at least some assurance I can have a minute or two, so I can power down.
Mine claims about 25 mins to power down with a resting pull of 240 watts, 15 mins while using GPU for SD or AI stuff (400 watts). The key importance in my mind though isn’t the time to shut down, but how long term dirty power will cause failure in your components. I learned this the hard way back in the C-64 days where I went through 3 of them (Circuit City warranty covered them) before I got a very crude version of a UPS to stop killing the poor computer with ups and downs in power surges.
Ah I see, well it sounds like I have a lot to learn in this area lol. Not to mention, glad I finally got a UPS. 😳