I started resin printing and I am wondering if you guys use a full on resperator (if so is their a specific classification you’d recommend?) Or do you just use a cloth / surgical mask?

So far I have been using the mask that came with my printer (Elegoo mars 3 pro) but and not sure if that is sufficient.

  • @[email protected]
    link
    fedilink
    English
    41 year ago

    I don’t use a respirator at all, but I also don’t hang out in that room while it’s printing, and I have a small air purifier that runs in there full time.

    • @WestwardWinds
      link
      English
      61 year ago

      A additional concern with resin printers is VOCs, Volatile Organic Compounds, which air purifiers don’t really filter out since they’re focused on particulate cleaning. Sadly there is no solution like dilution, or in this case ventilation

    • @AverageGoobOP
      link
      English
      21 year ago

      I also don’t hang out there while it’s printing in my garage. Generally I spend less than 20ish minutes while I clean one print and get another one going.

    • @NotVeryHelpful
      link
      English
      21 year ago

      Same here. As long as there is decent ventilation in the room you’re printing in and you don’t hang out excessively in the room while printing you should be totally fine. Eye protection and gloves are far more important imo

      • @CIA_chatbot
        link
        English
        3
        edit-2
        1 year ago

        I wouldn’t be in the room where the resin printer is printing, if you have to they make small carbon filter devices that sit inside the printer that help a lot. I would then also get a cheap room fair purifier and sit next to it as well.

        Resin is a pain because it can be pretty toxic all around

        Edit: I meant to reply to the OP with this, but I’m too lazy to move it ;)

      • @AverageGoobOP
        link
        English
        21 year ago

        I do have eye protection and gloves… I probably should be using those more than I do. So far mask has been the one I use most frequently.

        • @NotVeryHelpful
          link
          English
          31 year ago

          You should be using gloves anytime you are working with liquid resin. Skin contact with resin can cause/worsen a resin allergy over time. I’ve read accounts of people unable to be in the same room as an open bottle of resin because their allergy got so bad. Uncured resin is highly highly toxic