once a year I email my favorite flashlight manufacturer to ask if they’ve finally made a flashlight that just turns on and off when you push the button, and every year they’re like, “no, but thanks so much for your feedback!”

be honest, have any of you ever used the flashing feature on your flashlight? did it actually come in handy? handy enough that I have to scroll past it every single time I want to turn my flashlight on or off

  • @[email protected]
    link
    fedilink
    6
    edit-2
    21 hours ago

    You need flashlights with a better UI.

    I mean, yea, I think that’s what OP is saying.

    But it can be hard to find, with a high output/good battery.

    Lights using a 18650 seem to be the rage these days, at crazy cheap prices, but they all use some UI with clicks, holds, etc. I feel like I’m doing a dance to use any of mine, definitely not what you want in a circumstance requiring a flashlight.

    Even the simplest of lights require something most people would find unusual (and certainly never guess). Setting an Anduril light to “simple mode” is still more complex than I want in a light. It would be nice to have a simple click control, and be able to disable the strobe nonsense (never once in my life have I thought “ooh, a strobing light would be great right now!”). Nevermind the arguments for it are debatable (to confuse an attacker? Research has shown it affects you too).

    • @Jesus_666
      link
      120 hours ago

      Anduril is way overengineered. I like this UI that some of my lights have:

      While off:

      • One push: Turn on at the last used brightness.
      • Two pushes: Turn on at maximum brightness.
      • Three pushes: That strobe mode that you don’t need but seems to be obligatory.
      • Hold: Turn on at the lowest brightness (or moonlight mode if the light has one).

      While on:

      • One push to turn off.
      • Two pushes to toggle between maximum brightness and the last used “regular” brightness.
      • Three: That strobe mode that someone has to have some use for.
      • Hold: Alternately increase or decrease the brightness.

      That’s pretty easy to learn and gives you all the functions you’d reasonably need (plus that strobe) without a lot of clutter.

      • Badabinski
        link
        fedilink
        219 hours ago

        That’s basically all I use from my Anduril flashlights. I don’t bother with the candle modes and all that shit. I’ve only ever used Anduril v2 flashlights, so maybe Anduril v1 was less intuitive?

        • @Jesus_666
          link
          113 hours ago

          I also only used v2 but it’s the extra stuff in it that slightly annoys me. Like how turbo mode (brighter than the usual maximum but usually time-limited to avoid overheating) is only available when the full UI is unlocked. Or how there’s a stepped ramp mode that I have to remember to disable whenever I swap out the battery. Or how I can accidentally enter one of the more exotic modes of for some reason I press the button too often.

    • @FireRetardant
      link
      121 hours ago

      I really like the fenix flashlight I have. Main button on back turns light on and remembers your last setting (except strobe). There is one other button along the side. Pressing once cycles up the brightness until max, holding turns on the strobe. Very easy to use. I often use it on the lowest brightness and just turn it up if needed. The side button also doubles as the charging indicator, glowing red while charging and green when fully charged.

      As for strobing lights i use them to signal or mark things at night. Some peope use them while cycling or walking at night to increase how visible they are. I sometimes use a strobe to mark tents or ice huts in the dark but i usually try to use strobing red light as its less distracting and uses less power