I’m thinking about moving my router to be a VM on a server in my homelab. Anyone have any experience to share about this? Any downsides I haven’t thought of?
Backstory: My current pfSense router box can’t keep up with my new fibre speeds because PPPOE is single threaded on FreeBSD, so as a test, I installed OpenWRT in a VM on a server I have and using VLANs, got it to act as a router for my network. I was able to validate it can keep up with the fibre speeds, so all good there. While shopping for a new routerboard, I was thinking about minimizing power and heat, and it made me realize that maybe I should just keep the router virtualized permanently. The physical server is already on a big UPS, so I could keep it running in a power outage.
I only have 1 gbps fibre and a single GbE port on the server, but I could buff the LAN ports if needed.
Any downsides to keeping your router as a VM over having dedicated hardware for it?
I’ve been doing it for probably 8 years now without any major issues related to being a VM. In fact, that made recovery extremely easy the two times my PFsense VM shot itself in the head. Just load the backup of the VM taken the day before and off to the races. After switching to OPNsense a couple years ago I haven’t had a single issue.
These days I run two identically spec’d hypervisors that constantly sync all my VMs to each other over 10GB NICs, so even a hardware failure won’t take out my routing. That is something to consider if you don’t have redundant hypervisors. Not really any different than if your physical router died, just something to plan for.