My prints up to this point have been okay, but not great. Serious stringing seems to be an issue here, and one of the things I’ve notice is that the further along the print goes, the more it seems like the print head is almost grinding into the print. To the point where if I’m printing something like a minifigure, it will get ripped apart mid print. Am I overextruding? Missing z steps?
Filament is Overture PETG, Nozzle is 230C and bed is 80C. I have it in an enclosure. I’m running it from a laptop set up with Cura.
For grinding, try calibrating with a calibration cube and calipers.
For the stringing, try calibrating your extrusion steps. If it continues, try dialing back your temp 5° at time.
There is a process for retracting slightly between hops, but that may be a slicing option.
I’ll try dropping temps and see what I get. Thank you!