• cloaker
    link
    fedilink
    61 year ago

    If your fans a plugged in via molex see here, then they won’t be controlled by the pc and will run at max speed. If your fans are all plugged in via the motherboard they might be loud or the fan speed is too high. You can make them run slower by adjusting the fan curve, of which there are instructions on Google.

    • cryshlee
      link
      fedilink
      41 year ago

      I’ve adjusted my fan’s curves via BIOS—but I am really paranoid as this is my first build and figured that when it gets to above ~45C they should increase in speed. I do a lot of 3D rendering, not so much gaming, and my CPU and GPU usually average between 50-60C when I do this. Would lowering their speeds be detrimental to my mobo or components? 🥲

      • Alto
        link
        fedilink
        9
        edit-2
        1 year ago

        50-60C is still way far from the danger zone. You’re not going to run into issues unless they’re pegged closer to 100C for extended periods of time, and even then your PC is more likely to shut itself down to protect itself than kill itself.

        Edit: not that you should run your PC at 100C. Anything below 90C and you’re almost certainly not going to run into any issue other than loud fans.

        • cryshlee
          link
          fedilink
          21 year ago

          Thank you so so much for the reassurance. I’ve really been freaking out at every temp spike thinking it’s gonna spontaneously combust. I didn’t give a shit about my prebuilt lmao but this one is my baby 😭

      • cloaker
        link
        fedilink
        41 year ago

        My cpu runs around 58 when gaming. That’s fine, my hot water from the tap is that temp.