Incandescent light bulbs are officially banned in the U.S.::America’s ban on incandescent light bulbs, 16 years in the making, is finally a reality. Well, mostly.

  • @[email protected]
    link
    fedilink
    English
    210 months ago

    Any recommendations? I’ve struggle with LED light color temp off and on over the years. I haven’t looked into it in a while though. It always seems like if you want a low color temp it has to be an edison bulb which is really dim.

    On a separate note I’ve also had reliability issues with LED bulbs where they will blow out and emit smoke.

    • @[email protected]
      link
      fedilink
      English
      1010 months ago

      Look for colour names like “soft white” or “warm”. The 2700K is a dead give away for the colour you’re looking for.

      Also, separate note: check your appliances or fixtures for power spikes. cheaper LEDs are notoriously sensitive to voltage fluctuations

        • @[email protected]
          link
          fedilink
          English
          610 months ago

          Look closely at packaging. If you’re in North America, Phillips is the most common for bulbs. They have packages marked 2700K, 5000K, and 6500K.

          The colours are as follows: 2700- soft white (yellow hue), 5000- bright white (white hue, almost no colour), and 6500- day light (blue-ish hue, similar to fluorescent).

          If you end up not being able to distinguish… ask an employee and they should be able to help

            • @[email protected]
              link
              fedilink
              English
              3
              edit-2
              10 months ago

              Lol im dumb… forgot it was a 2 pt question.

              Cheap way is to buy a surge protector/ power strip with surge protector.

              Plug in appliances/lights that burn out faster than others. Periodically check surge protector to see if the internal breaker has been tripped.

              Fancy way is to buy a multimeter and monitor voltage when large appliances turn on/off. That’s usually the most likely culprit for voltage spikes (as your home grid has to compensate for sudden increase in usage, which in turn causes voltage to fluctuate slightly)