Personally I would use something that can run OpnSense. Then grab POE access points for wifi, later on when a new standard comes out you just replace the AP instead of the whole router.

It’s an active project that is updated regularly. As long as the hardware supports X86-64 it should run with no problem. If you area looking to build a home lab IMHO it’s hard to beat.

https://docs.opnsense.org/manual/hardware.html

I personally use a Supermicro X10SLL-F and a E3-1226 v3 with 16GB of RAM. Built it a few years ago for about 150 with an old PSU and case with a 120gb sata ssd and threw in a Mellanox ConnectX3 to run to my fiber backbone. I can squeeze every ounce out of the 1G fiber connection and run multiple vLan’s, Caddy and Let’s Encrypt acme client, plus a IPv6 Tunnel since my ISP doesn’t have native connectivity.

I’ve considered getting rid of the ONT and dropping in a gPON SFP module but honestly not sure if my ISP will be willing.